FSIP motor fitment

[scottyb]

The yellow FSIP speed and torque motors fit the 48v Yamaha carts like G19-22 and G29 Drive. The Speed motor is 9 5/8 inch long and fits all models G19 - G29.
The Torque motor is longer measuring 10 3/4 inch. It fits the G29 but will not fit the G19-22 without shock mount rework.
Both motors play well with the Alltrax XCT controllers.
I hope this helps

[Craeshe]

Scotty, i just ran into this problem yesterday! I just got a 10.5 motor for my G29 2007 YDRE. Last thing to do was install the shock, it was blocked.

Now i guess maybe I do not have a G29? Not sure anymore...I am having to fabricate a bracket for my shock.

Serial #: JW2-208142 (Is that the G29 YDRE?)

[scottyb]

Good information. How much does your shock miss the mount hole by?

[Craeshe]

Originally Posted by scottyb

Good information. How much does your shock miss the mount hole by?

In the pic, that it as close as the shock can get, and that is hitting the motor...

I was also told previously that the G29 would fit this motor without shock modification - but perhaps its the type of lift i have? It was installed before i bought it. Pic attached.

[Craeshe]

Originally Posted by scottyb

Good information. How much does your shock miss the mount hole by?

Do you have any clever extension/mods type fixes - or do i simply need to make/relocate a whole new bracket?

[scottyb]

Your picture looks like the motor is blue?
A D&D motor maybe?

[Craeshe]

Originally Posted by scottyb

Your picture looks like the motor is blue?
A D&D motor maybe?

Ohh yes, the motor is a DandD, but the length is the same. I didnt realize you had specified a brand - i was going off the motor size. They ensured me the motor would fit without mods needed - That another issue now....