|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
11-17-2010, 04:43 PM | #1 |
Not Yet Wild
Join Date: Nov 2010
Posts: 6
|
2001 EZ-GO Clicking won't go
In checking things out removed cover on FWD/Reverse Box. In checking connections I crossed two of the larger wires on the back one goes to the soleniod and one to the motor I think and the cart moved. Retested by jumping a second time and it moved again. Checked and tightened all connections. But if I try move it forward or reverse just get clicking from the seloniod if I jump the two connections it moves. Any ideas on what may be causing this. Leaving it jumped is not a solutition want to find and repair the problem. Thanks in advance for any help.... Joe
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-18-2010, 12:53 AM | #2 |
nimda
Join Date: Jun 2007
Posts: 13,022
|
Re: 2001 EZ-GO Clicking won't go
Just because a solenoid clicks doesn't mean it's good. If you jumped the 2 large terminals and it moved then the solenoid is bad.
|
11-18-2010, 01:00 AM | #3 |
Gone Wild
Join Date: Jun 2010
Location: Central Florida
Posts: 2,757
|
Re: 2001 EZ-GO Clicking won't go
ummm not to second guess Roady, but were you jumping wires on the F&R or on the solenoid? From what I am reading it sounds like you were jumping the F&R and getting results, If so, then likely as not you have some burnt contacts on the F&R and will need either some new studs, a new cam, or possibly a complete new F&R. Pictures would help to determine the extent of the damage and I am sure Scotty can assit you with whatever parts you have a need for since he is a site sponsor.
|
11-18-2010, 03:46 PM | #4 |
Not Yet Wild
Join Date: Nov 2010
Posts: 6
|
Re: 2001 EZ-GO Clicking won't go
I was jumping the F&R and getting results. If I dont't jump then just clicking from the selonoid. On one of the photo's I have blue tape on the leads that I jumped. See photo... Thanks Joe
|
11-18-2010, 09:09 PM | #5 | ||
nimda
Join Date: Jun 2007
Posts: 13,022
|
Re: 2001 EZ-GO Clicking won't go
Quote:
Quote:
One of your F/R terminals looks a little cooked . Try this: While pressing down on the pedal wiggle the F/R back and forth and see if it jumps. If it does then you need a F/R switch. |
||
01-07-2011, 02:06 PM | #6 |
Not Yet Wild
Join Date: Nov 2010
Posts: 6
|
Re: 2001 EZ-GO Clicking won't go
I pulled the switch and it had burn discoloration on one side - I got parts and rebuilt and reinstalled the switch. It seemed OK no smell and works fine in Forward but I get nothing in Reverse just the clicking from the solenoid. I also tried switching the micro switches to see if one bad - see if after switching them if problem would reverse and it would go in reverse and not forward - BUT no difference still will move forward but nothing but the clicking in reverse. Any help in resolving would be great.
Thanks Joe |
01-07-2011, 02:23 PM | #7 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: 2001 EZ-GO Clicking won't go
I think you still have some bad contact in the F&R.... In your pic the blue tape is on the terminal at 9 o'clock and 6 o'clock Jumping them connects motor terminal S1 with Controller terminal B+.... You say you have only F or R now. Try this test ~ swap cables at 9 and 3 ... do not jumper, just swap them. If you have Rev and not Forward now the F&R contacts are likely still at fault.
You can try tighten the nut (B) on the Center Pivot (X) nut a turn or 2 (max) to increase contact pressure. |
01-07-2011, 03:30 PM | #8 | |
Not Yet Wild
Join Date: Nov 2010
Posts: 6
|
Re: 2001 EZ-GO Clicking won't go
Quote:
Thanks Joe |
|
01-07-2011, 03:32 PM | #9 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: 2001 EZ-GO Clicking won't go
let me know if you need a new HD F&R If you have replaced all the stationary lugs at 9,12,3,&6 o'clock then you may just need the hd Switch cam
|
01-07-2011, 03:59 PM | #10 |
Not Yet Wild
Join Date: Nov 2010
Posts: 6
|
Re: 2001 EZ-GO Clicking won't go
|
|
|
Similar Threads | ||||
Thread | Forum | |||
solenoid not clicking | Electric Club Car | |||
solenoid clicking | Electric EZGO | |||
HD solenoid clicking | Electric EZGO | |||
clicking | Electric EZGO | |||
solenoid clicking | Electric Club Car |