03-25-2017, 04:17 PM | #1 |
Not Yet Wild
Join Date: Feb 2017
Posts: 2
|
Ezgo piston rings
I have a 295 cc putting new rings. the silver band ring is the top but is beveling on the inside. does the bevel go up or down there are know markings on the rings.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-25-2017, 07:23 PM | #2 |
Not Yet Wild
Join Date: Dec 2016
Location: Oklahoma
Posts: 47
|
Re: Ezgo piston rings
I've been told bevel goes up. Just did a rebuild about a 2 months ago. Running fine since.
|
03-25-2017, 08:20 PM | #3 |
Gone Wild
Join Date: Dec 2010
Location: Woodstock,GA
Posts: 1,088
|
Re: Ezgo piston rings
Look very closely at the ring near the gap and there should be a ( O ) that is the top.
That's the way mine were anyway. |
03-26-2017, 08:29 AM | #4 |
Gone Wild
Join Date: Mar 2015
Location: Montville,Ohio
Posts: 177
|
Re: Ezgo piston rings
bevel on top
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Piston rings | Gas EZGO | |||
Piston and rings | Gas Yamaha | |||
New Piston Rings? | Gas Yamaha | |||
installing piston rings | Gas EZGO | |||
What could cause piston rings to break? | Gas EZGO |