|
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
10-31-2018, 11:30 PM | #11 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: G3 E Conversion to 48v - Perfect Replacement For Original Reversing Contactors?
Yes, looks right, and a good price too. You would need to get creative to connect your small wires, you have Spade terminals, the solenoids have little studs. You could get adapters, or just clip the spades off your wires and install ring terminal. Also, I'm not sure if the bars on the side of your solenoids are the correct length, but that could be remedied with some short cables to make the connections.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-31-2018, 11:34 PM | #12 |
Gone Wild
Join Date: Jan 2015
Posts: 239
|
Re: G3 E Conversion to 48v - Perfect Replacement For Original Reversing Contactors?
This is fantastic information and I sincerely appreciate it.
Also, what 48v solenoid would you recommend for the B+ side? MZJ400A SW180 or? |
10-31-2018, 11:36 PM | #13 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: G3 E Conversion to 48v - Perfect Replacement For Original Reversing Contactors?
Sw180 is good. Also, there is a 4p version of the white-rogers solenoid that would match the other ones you are looking at.
|
10-31-2018, 11:39 PM | #14 |
Gone Wild
Join Date: Jan 2015
Posts: 239
|
Re: G3 E Conversion to 48v - Perfect Replacement For Original Reversing Contactors?
Can't seem to find the 4p version?
|
10-31-2018, 11:42 PM | #15 |
Gone Wild
Join Date: Jan 2015
Posts: 239
|
Re: G3 E Conversion to 48v - Perfect Replacement For Original Reversing Contactors?
|
10-31-2018, 11:43 PM | #16 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: G3 E Conversion to 48v - Perfect Replacement For Original Reversing Contactors?
Yes.
|
10-31-2018, 11:44 PM | #17 |
Gone Wild
Join Date: Jan 2015
Posts: 239
|
Re: G3 E Conversion to 48v - Perfect Replacement For Original Reversing Contactors?
Which would you personally go for? And thanks :)
|
10-31-2018, 11:47 PM | #18 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: G3 E Conversion to 48v - Perfect Replacement For Original Reversing Contactors?
The sw180 is technically rebuild able, but the W/R is 100% sealed from water & dust. I would go with the W/R.
|
10-31-2018, 11:49 PM | #19 |
Gone Wild
Join Date: Jan 2015
Posts: 239
|
Re: G3 E Conversion to 48v - Perfect Replacement For Original Reversing Contactors?
Okay great I sincerely appreciate your expertise and your time. I'm learning slowly....But getting hooked quickly!
|
10-31-2018, 11:55 PM | #20 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: G3 E Conversion to 48v - Perfect Replacement For Original Reversing Contactors?
Glad to help.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
reversing contactors | Electric Yamaha | |||
Reversing contactor/48 volt conversion. Orange & Blue wires. | Electric EZGO | |||
Reversing Contactors | Electric EZGO | |||
Reversing Contactors from Scotty'B ??? | Electric EZGO | |||
Reversing Contactors | Announcements |