|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
12-02-2021, 04:55 PM | #1 |
Not Yet Wild
Join Date: Dec 2021
Posts: 5
|
1996 EZGO CDI ignitor and Voltage Regulator wiring
So I just replaced the CDI Ignitor and Voltage regulator on my cart. It ran before but not now! I think I may have messed up some wiring. Turns over but won't start. There is an orange and red wire that goes out from the CDI ignitor. I put them both on the positive lower terminal on the starter solenoid. Is that correct?
Anyone have pictures of their 96 or close to EZGO wiring? Golf cart Christmas parade is in 2 days. Clock is a tickin' Thanks |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-02-2021, 06:34 PM | #2 |
Test before replacing
Join Date: Aug 2013
Location: Ohio side of the Pennsylvania border.
Posts: 3,491
|
Re: 1996 EZGO CDI ignitor and Voltage Regulator wiring
Looks to me that red goes to the pulsar. https://buggiesgonewild.com/attachme...3&d=1540227576
|
12-03-2021, 11:06 AM | #3 |
Not Yet Wild
Join Date: Dec 2021
Posts: 5
|
Re: 1996 EZGO CDI ignitor and Voltage Regulator wiring
Yeah the plug makes that happen. However there's another red wire coming out of where the plug is and that red wire is the one in question
It won't let me post a link yet because Im a new member. But if you look up this part on Amazon you will see a picture of the red wire coming out of the clip with a round terminal on it. I put that on the lower left terminal of the starter solenoid XQSMWF CDI Ignitor 72562-G01 Compatible with EZGO Golf Cart 4 Cycle Gas Models 1991-2002 EPIGC107 |
12-03-2021, 12:43 PM | #4 |
Not Yet Wild
Join Date: Dec 2021
Posts: 5
|
Re: 1996 EZGO CDI ignitor and Voltage Regulator wiring
Looks like I had the wiring correct. It was a faulty CDI. Chinese rip off. I'll order an OEM one . I put my old one back in and it runs.
|
12-03-2021, 08:58 PM | #5 |
Vintage tech
Join Date: Sep 2009
Location: South
Posts: 3,210
|
Re: 1996 EZGO CDI ignitor and Voltage Regulator wiring
|
12-04-2021, 09:30 PM | #6 |
Gone Wild
Join Date: Jul 2020
Location: NC
Posts: 770
|
Re: 1996 EZGO CDI ignitor and Voltage Regulator wiring
If it was running, and isn't now after replacing parts...put the old ignitor back in.
|
Tags |
cdi, ezgo, regulator, wiring |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Voltage regulator wiring | Gas Club Car | |||
Voltage Regulator Wiring | Gas Club Car | |||
G9 voltage regulator wiring | Gas Yamaha | |||
Voltage Regulator Wiring | Gas Columbia ParCar | |||
wiring on voltage regulator | Gas EZGO |