Two cycle mufflers & parts

panelbeatr · 06-12-2011, 10:30 AM

89 Ez-Go Marathon 2 cycle 3PG ~
The exhaust parts for this machine now cost $400 new!! - Has anyone here tried to install a motorcycle muffler going out the rear ?? I'm looking for a used muffler along with some carb linkage & misc. parts. These carts use a worm drive input gear on the differental that the driven clutch goes on - has anyone here replaced the input bearings?? It looks like you may have to split the diff housing to replace the bearings??

ScooterMcTavish · 06-12-2011, 11:10 AM

Hey PB,

Do you still have the muffler, or are you sans muffler?

If you still have the muffler, have a muffler BBQ - that may solve your issues.

If you're missing carb parts, I don't think the linkages cost that much. If you also still have your oil injector hooked up, you can strip this off, and steal the linkages from it (and go to premix).

Can't help you with the clutch question.

panelbeatr · 06-12-2011, 06:58 PM

I bought this as a basket case, for the motor, for my 2pg - guy said it was a 88 model with a uninstalled good engine but ended up being an 89.... It is a truckster so I went ahead and put the engine it came with in. It did come with a muffler but it was a vertical one for my 87, not the horizontal 3pg one.... A.P.B.... any one.... any parts??

06-12-2011, 10:30 AM	#1
panelbeatr Getting Wild Join Date: Sep 2010 Location: NE KS Posts: 111	Two cycle mufflers & parts 89 Ez-Go Marathon 2 cycle 3PG ~ The exhaust parts for this machine now cost $400 new!! - Has anyone here tried to install a motorcycle muffler going out the rear ?? I'm looking for a used muffler along with some carb linkage & misc. parts. These carts use a worm drive input gear on the differental that the driven clutch goes on - has anyone here replaced the input bearings?? It looks like you may have to split the diff housing to replace the bearings??

06-12-2011, 11:10 AM	#2
ScooterMcTavish Gone Wild Join Date: Oct 2009 Location: Manitoba, Canada Posts: 363	Re: Two cycle mufflers & parts Hey PB, Do you still have the muffler, or are you sans muffler? If you still have the muffler, have a muffler BBQ - that may solve your issues. If you're missing carb parts, I don't think the linkages cost that much. If you also still have your oil injector hooked up, you can strip this off, and steal the linkages from it (and go to premix). Can't help you with the clutch question.

06-12-2011, 06:58 PM	#3
panelbeatr Getting Wild Join Date: Sep 2010 Location: NE KS Posts: 111	Re: Two cycle mufflers & parts I bought this as a basket case, for the motor, for my 2pg - guy said it was a 88 model with a uninstalled good engine but ended up being an 89.... It is a truckster so I went ahead and put the engine it came with in. It did come with a muffler but it was a vertical one for my 87, not the horizontal 3pg one.... A.P.B.... any one.... any parts??

Similar Threads
Thread	Forum
EZ GO Manuals!! 89-93 2-cycle gas Owner's/Service Manual & 89-91 Parts Manual	Gas EZGO
89 marathon 2 cycle truckster parts & pdf	Gas EZGO
aNyone got used ezgo 2 cycle parts???	Gas EZGO
mufflers	Big Block Talk!
mufflers that are tuneable?	Big Block Talk!

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum