|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
06-16-2017, 07:51 PM | #1 |
Not Yet Wild
Join Date: Jun 2017
Posts: 56
|
Wiring discrepancy on Alltrax SR 48500
So my old controller had a small wire from B- to the small terminal on the solenoid. Alltrax has this wire going to one of the spade terminals..... I just want to make sure I'm reading the schematic correctly. B4 I let the smoke out of something.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-30-2018, 11:50 AM | #2 |
Gone Wild
Join Date: Dec 2017
Location: Mesa, AZ
Posts: 155
|
Re: Wiring discrepancy on Alltrax SR 48500
did you ever get an answer to this? i am seeing the same thing you did and i think your assumption is correct
|
04-30-2018, 12:06 PM | #3 |
Gone Wild
Join Date: Sep 2017
Posts: 690
|
Re: Wiring discrepancy on Alltrax SR 48500
You might want to contact Alltrax directly to confirm.
|
04-30-2018, 01:41 PM | #4 |
Gone Wild
Join Date: Sep 2016
Location: Northern California
Posts: 1,300
|
Re: Wiring discrepancy on Alltrax SR 48500
Post a pic of the diagram and guys will help you out.
I know that when I installed my sr48500 there were some differences compared to how the old one was wired. I guess there are a couple of different ways it can be done. Did you get yours from Scotty? I found his diagram easier to follow than the one in the manual. Always better to be safe than sorry, but if you follow Scotty’s, you’ll be good. |
04-30-2018, 10:11 PM | #5 |
Not Yet Wild
Join Date: Mar 2016
Posts: 31
|
Re: Wiring discrepancy on Alltrax SR 48500
That’s how I just did mine. Negative on solenoid to black spade connector on controller
|
05-01-2018, 10:19 AM | #6 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,418
|
Re: Wiring discrepancy on Alltrax SR 48500
The manual explains that either way will work. Moving Solenoid - from B- to J1 black allows the controller to cut the connection when the power is off as a failsafe feature.
|
05-01-2018, 10:20 AM | #7 |
Gone Wild
Join Date: Dec 2017
Location: Mesa, AZ
Posts: 155
|
Re: Wiring discrepancy on Alltrax SR 48500
Thanks guys, I finished that part and then emailed ScottyB on another since I am running his F/R switch, sw182... needless to say, he answered my question and then I ordered a new F/R switch.
Since I can’t hack the 36v switch to run on 48v with my lithium pack. I have to get a 48v switch [emoji853] If anyone needs/wants a pretty new 36v F/R switch. I can ship it quick and it would be slightly cheaper than a brand new one! Sent from my iPhone using Tapatalk |
|
|
Similar Threads | ||||
Thread | Forum | |||
Alltrax SR 48500 CC DS will not move | Electric Club Car | |||
Alltrax SPM 48500 error code | Electric EZGO | |||
New Alltrax bearcat 48500 iq | Electric Club Car | |||
Mounting a Alltrax 48500 in a EZGO | Electric EZGO | |||
Alltrax SPM-48500 New | Golf Carts and Parts |