|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
11-07-2018, 02:29 PM | #11 |
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: Another ezgo ign switch question
A three position key switch is two independent switches. Position 1 is off. Position 2 is run - switch one closes (turns on). Position 3 is run with accessories - switch one and two are closed.
My three position key switch has one switch wired per wiring diagram. The second switch is wired any way you want. It can serve as the trigger wire for a reducer. One side of key switch two would be pack +, and the other side will be reducer trigger. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-07-2018, 09:42 PM | #12 |
Gone Insane
Join Date: Oct 2016
Location: Richmond, VA
Posts: 14,215
|
Re: Another ezgo ign switch question
As yurtle has noted the 3 position switch is off, on and accessory. I know the gas TXT's wire the lights into the 3rd position position because it is all 12v. What type switch do you have now?
|
11-12-2018, 02:17 PM | #13 |
Not Yet Wild
Join Date: Nov 2018
Posts: 16
|
Re: Another ezgo ign switch question
The switch I have now is just off on 2 post. One blue wire coming from MS2 which I see as 36 volts positive, and one green wire going to MS3. Unless I am missing something, which as I get older is more likely than not, even if I use this existing blue wire, I will still need a 36 volt negative wire for my digital voltmeter and LED beacon? I look forward to your input.
|
11-13-2018, 06:08 PM | #14 |
Not Yet Wild
Join Date: Nov 2018
Posts: 16
|
Re: Another ezgo ign switch question
I just received a HD switch I ordered and the info that came with it says it is for a ezgo 1981 & up golf cart ignition with lights, gas or electric- 4 prong with 2 upgraded keys ( whatever that means?) it did not come with a wiring diagram, but was able to find one on this site that it along with the great help I have already received from "Mooncarter" and "Yurtle" I should be good to go.
|
11-13-2018, 06:16 PM | #15 |
Gone Insane
Join Date: Oct 2016
Location: Richmond, VA
Posts: 14,215
|
Re: Another ezgo ign switch question
If you are going to run the "beacon" at 36v off of the 3rd position, yes. Please note you will still need a 36-12 volt reducer and separate wiring for everything else.
|
11-13-2018, 06:28 PM | #16 |
Gone Insane
Join Date: Oct 2016
Location: Richmond, VA
Posts: 14,215
|
Re: Another ezgo ign switch question
I would use the second position for the volt meter, and of course running the cart.
Since the beacon will run at 12v, use the 3rd position to "trigger" a voltage reducer. Then run ALL switches and accessories from there. This way you have no draw on the pack when you turn the key off. |
11-13-2018, 09:17 PM | #17 | |
Gone Wild
Join Date: Jun 2017
Location: Savannah, GA
Posts: 6,539
|
Re: Another ezgo ign switch question
Quote:
I agree. Best idea. Club Car DS driver’s club #59 |
|
11-14-2018, 11:13 PM | #18 |
Not Yet Wild
Join Date: Nov 2018
Posts: 16
|
Re: Another ezgo ign switch question
I am following your advice so I just ordered a 36volt to 12 Vdc reducer. When you say to use the 3rd switch position to "trigger" the voltage reducer, are you saying that you should run the voltage reducer power in to the switch first and then to the voltage reducer?
|
11-14-2018, 11:26 PM | #19 |
Gone Insane
Join Date: Oct 2016
Location: Richmond, VA
Posts: 14,215
|
Re: Another ezgo ign switch question
No. What reducer did you order? It will come with instructions, wiring etc. to trigger it.
The reducer will get its power from the BATTERY PACK itself. You want nothing between that except a fuse. |
11-14-2018, 11:31 PM | #20 |
Gone Insane
Join Date: Oct 2016
Location: Richmond, VA
Posts: 14,215
|
Re: Another ezgo ign switch question
If you bought one that is a plain stand alone reducer you will have to build your own switching system from the key switch. Or, you could install a toggle to turn it on and off, or (not recommended) leave it on all the time.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
EZGO Marathon switch question | Electric EZGO | |||
question about ezgo FNR switch | Electric EZGO | |||
Ezgo txt gas/fnr switch-spark question | Gas EZGO | |||
Ezgo fuel/ignition switch question | Gas EZGO | |||
Dumb question/97 EZGO switch | Electric EZGO |