|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
01-02-2020, 06:37 AM | #1 |
Not Yet Wild
Join Date: Jun 2019
Posts: 20
|
new controller & solenoid install questions
Question 1
Installing new 500A Curtis controller and solenoid on my 1994 TXT. The new controller is much larger and the cover will not fit. Leave it uncovered or is there other options. Question 2 The solenoid came with 2 sleeves and bolts to act as a stand off. Do the standoffs go under the original solenoid bracket or did you locate your solenoid in a new location? Thanks |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-02-2020, 08:02 AM | #2 |
Gone Wild
Join Date: Nov 2011
Location: S.E. Mi.
Posts: 531
|
Re: new controller & solenoid install questions
1) Leave uncovered.
2) Mount it as described and all the wires and cables should fit. |
01-02-2020, 08:25 AM | #3 |
Gone Wild
Join Date: Jun 2017
Location: Savannah, GA
Posts: 6,539
|
Re: new controller & solenoid install questions
You don’t need or want the cover with an Alltrax controller. They have built in heat sinks on the top, and they are water resistant.
|
Tags |
controller, solenoid |
|
|
Similar Threads | ||||
Thread | Forum | |||
No Power after Controller and Solenoid Install | Electric Club Car | |||
Alltrax Controller and 400a Solenoid Install Help | Electric Club Car | |||
TXT HD Solenoid/Controller Install/Upgrade | Electric EZGO | |||
Controller, Solenoid, Cables Install | Electric Club Car | |||
How did you install your controller/solenoid | Electric EZGO |