lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV.

Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 10-02-2015, 07:47 AM   #11
Happy Carting
scottyb's Avatar
Join Date: Dec 2007
Location: Southern California
Posts: 72,505
Default Re: axle bearing and seal replacement.

Okay coffee.

Remove the axle nut. Place the axle in the vice so the bearing surface is above the jaws. Tighten the vice. Put a light coat of light oil on the bearing surface. Place the new bearing on the axle, Place the old bearing on top of it. Slide the 3/4 pipe down on top of the axle and tap it with a small heavy hammer until the bearing reaches the seat area.

Observe there is not stop for the bearing & it can be driven too far. If this happens use the removal method to back it off. When the bearing is properly placed remove the pipe and old bearing and slide the axle into the tube.

If the new bearing resists insertion in the tube put the axle nut on backwards to protect the threads and tap the axle until the bearing just passes and exposes the C lip groove. Install C clip.
scottyb is offline   Reply With Quote
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO

Thread Tools
Display Modes

Similar Threads
Thread Forum
Yamaha G1 seal replacement files Gas Yamaha
Axle Bearing Electric Club Car
louder exhaust after seal replacement Gas Yamaha
Bearing replacement Electric EZGO
g1 crank seal replacement Gas Yamaha

All times are GMT -5. The time now is 12:46 AM.

Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2023, vBulletin Solutions, Inc.
This Website and forum is the property of No material may be taken or duplicated in part or full without prior written consent of the owners of © 2006-2017 All rights reserved.