lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Club Car
Gas Club Car Gas DS, and Precedent golf cars



Post New Thread  Reply
 
Thread Tools Display Modes
Old 01-22-2020, 08:03 PM   #31
Fairtax4me
Bonafide Nincompoop
 
Fairtax4me's Avatar
Club Car
 
Join Date: Dec 2015
Location: Charlottesburg Va
Posts: 8,987
Default Re: FE290 engine rebuild

Looks like a cat exploded in there.
Nice job on the write-up so far! I’ve wanted to do a similar step by step pic process DIY thread like this for a while, but I always forget to take pics when I’m working. Three beers in there’s bolts and parts everywhere and an engine on the floor and I go “Dangit forgot again!”
Fairtax4me is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 01-22-2020, 09:44 PM   #32
CP241
Nincompoop village idiot
 
CP241's Avatar
Club Car
 
Join Date: Apr 2018
Location: Michigan
Posts: 9,628
Default Re: FE290 engine rebuild

Quote:
Originally Posted by Fairtax4me View Post
Looks like a cat exploded in there.
Nice job on the write-up so far! I’ve wanted to do a similar step by step pic process DIY thread like this for a while, but I always forget to take pics when I’m working. Three beers in there’s bolts and parts everywhere and an engine on the floor and I go “Dangit forgot again!”
Thanks buddy

no idea what lived in there, but they built quite the home for themselves. That's just what's left, I already had a large pile of the same stuff on my floor under the cart that I had to pull out to get to bolts and stuff to pull the motor!

I frequently find myself in the same situation

With the job change and a big move coming soon, this will probably be the last cart I rebuild for a while so thought I'd try and do something different and helpful some folks can benefit from. :)
CP241 is offline   Reply With Quote
Old 01-23-2020, 12:54 AM   #33
CP241
Nincompoop village idiot
 
CP241's Avatar
Club Car
 
Join Date: Apr 2018
Location: Michigan
Posts: 9,628
Default Re: FE290 engine rebuild

Going back together


First I always like to run a hone through the cylinder. You're not trying to bore it out so it only takes a few seconds, but you want to clear the glaze off the cylinder walls for a couple reasons. 1. To make sure theres no vertical scoring you didnt notice before. And 2. To help the new rings seat.

Then take both the top and 2nd ring and set them into the cylinder. Use the piston to push them evenly (separate from one another) and then measure the ring end gap with a feeler gauge. I've got .015" here on both

The ring going on the top of the piston is the one with the chrome edge. The 2nd ring isnt chrome. The 2nd ring has an R on the top side next to the end of it. Refer to the service manual for ring orientation
Attached Images
File Type: jpg 20200122_221628.jpg (129.8 KB, 0 views)
File Type: jpg 20200122_222338.jpg (207.9 KB, 0 views)
File Type: jpg 20200122_222421.jpg (136.0 KB, 0 views)
File Type: jpg 20200122_222938.jpg (156.0 KB, 0 views)
File Type: jpg 20200122_223145.jpg (127.8 KB, 0 views)
CP241 is offline   Reply With Quote
Old 01-23-2020, 01:00 AM   #34
CP241
Nincompoop village idiot
 
CP241's Avatar
Club Car
 
Join Date: Apr 2018
Location: Michigan
Posts: 9,628
Default Re: FE290 engine rebuild

Once the rings are installed, insert the piston into the cylinder. I use a nylon trim tool but everybody has their own methods here.

Next, install the counterbalance weight onto the crankshaft. This one the link rods are tight so I did not replace those bushings, maybe I'll do another write up on that next time :)

Once the counterbalance weight is installed, install the crankshaft into the motor case.

Then, install the counterbalance weight shaft in the bottom of the motor. It seals with an o ring into the block, replace if necessary.
Attached Images
File Type: jpg 20200122_224050.jpg (182.1 KB, 0 views)
File Type: jpg 20200122_224249.jpg (264.1 KB, 0 views)
File Type: jpg 20200122_224328.jpg (185.9 KB, 0 views)
File Type: jpg 20200122_224436.jpg (157.3 KB, 0 views)
File Type: jpg 20200122_224443.jpg (254.8 KB, 0 views)
CP241 is offline   Reply With Quote
Old 01-23-2020, 01:06 AM   #35
CP241
Nincompoop village idiot
 
CP241's Avatar
Club Car
 
Join Date: Apr 2018
Location: Michigan
Posts: 9,628
Default Re: FE290 engine rebuild

Next, clean the old gasket material off of the case. Yeah, I've had a drink or two and should have done this before now but better late than never

Install the camshaft and tappets. There is a dot on the camshaft and the crankshaft that should align.

Note to align the camshaft with the oil pump before setting timing if the oil pump has not been removed. There is a "slot" in the end of the camshaft that matches up to the oil pump.
Attached Images
File Type: jpg 20200122_225959.jpg (191.1 KB, 0 views)
File Type: jpg 20200122_231414.jpg (270.4 KB, 0 views)
File Type: jpg 20200122_232124.jpg (247.4 KB, 0 views)
CP241 is offline   Reply With Quote
Old 01-23-2020, 01:15 AM   #36
CP241
Nincompoop village idiot
 
CP241's Avatar
Club Car
 
Join Date: Apr 2018
Location: Michigan
Posts: 9,628
Default Re: FE290 engine rebuild

Next, to the head once the side cover is installed and torqued..

Remove the e clip in the middle of the rocker shaft. Then remove the rocker shaft and rocker arms. Then using a valve tool, remove the keepers and the valves. I stick something under the valve and just use the attachment from my cake tool to compress it and remove the valve keepers but that's just how I do it
Attached Images
File Type: jpg 20200122_232616.jpg (163.0 KB, 0 views)
File Type: jpg 20200122_232704.jpg (208.4 KB, 0 views)
File Type: jpg 20200122_233332.jpg (238.6 KB, 0 views)
File Type: jpg 20200122_232833.jpg (166.8 KB, 0 views)
CP241 is offline   Reply With Quote
Old 01-23-2020, 08:17 AM   #37
CP241
Nincompoop village idiot
 
CP241's Avatar
Club Car
 
Join Date: Apr 2018
Location: Michigan
Posts: 9,628
Default Re: FE290 engine rebuild

Sorry, meant to attach a better pic of the timing marks. Was getting late and forgot to upload it
Attached Images
File Type: jpg 20200123_010207.jpg (255.4 KB, 0 views)
CP241 is offline   Reply With Quote
Old 01-23-2020, 08:41 AM   #38
CP241
Nincompoop village idiot
 
CP241's Avatar
Club Car
 
Join Date: Apr 2018
Location: Michigan
Posts: 9,628
Default Re: FE290 engine rebuild

Once the valves are removed, inspect for wear. You could measure them, but they're not that expensive so I'll usually just replace them. You can see the ridge worn in the intake valve here compared to the new one.

You'll need to lap the new valves to make sure they seal well. I use a piece of vacuum hose and a drill, again light pressure and it only takes a couple seconds. You can see how the lapping compound leaves a nice even line in the middle where it contacts the seat. Make sure to clean off all the compound when you're done. And spray the inside of the head out with some brake cleaner.

Then remove the old valve stem seals and install new ones. I use a deep well socket and tap them into place.
Attached Images
File Type: jpg 20200122_234527.jpg (85.8 KB, 0 views)
File Type: jpg 20200122_234901.jpg (232.4 KB, 0 views)
File Type: jpg 20200122_235014.jpg (134.1 KB, 0 views)
File Type: jpg 20200122_233438.jpg (198.9 KB, 0 views)
File Type: jpg 20200122_234424.jpg (220.7 KB, 0 views)
CP241 is offline   Reply With Quote
Old 01-23-2020, 08:51 AM   #39
CP241
Nincompoop village idiot
 
CP241's Avatar
Club Car
 
Join Date: Apr 2018
Location: Michigan
Posts: 9,628
Default Re: FE290 engine rebuild

Next, use the valve spring compressor to reinstall the valves and keepers.

Reinstall the rocker arms and e clip. The washer goes to the left of the e clip from this angle. (Exhaust side)

Now, use a new head gasket, reinstall the push rods and head back onto the motor. Torque to spec. While the piston is still TDC set the valve lash. Spec is .0047 but lets be honest, nobody has a feeler gauge that size. I use .005 :)
Attached Images
File Type: jpg 20200122_235425.jpg (189.7 KB, 0 views)
File Type: jpg 20200122_235632.jpg (180.1 KB, 0 views)
File Type: jpg 20200123_000212.jpg (167.5 KB, 0 views)
File Type: jpg 20200123_000421.jpg (181.7 KB, 0 views)
CP241 is offline   Reply With Quote
Old 01-23-2020, 08:56 AM   #40
CP241
Nincompoop village idiot
 
CP241's Avatar
Club Car
 
Join Date: Apr 2018
Location: Michigan
Posts: 9,628
Default Re: FE290 engine rebuild

Next, install the flywheel. Make sure you didnt lose the keyway :)

Then the ignition coil goes back in. You can use feeler gauges, or a business card usually works well. I used a business card here and double checked with feeler gauges, it was right on.

Then reinstall all of the fan and cooking shrouds. Make sure to clean any leftover sludge out of the cooking fins on the motor first!
Attached Images
File Type: jpg 20200123_000732.jpg (192.6 KB, 0 views)
File Type: jpg 20200123_000920.jpg (162.7 KB, 0 views)
File Type: jpg 20200123_001226.jpg (201.2 KB, 0 views)
File Type: jpg 20200123_001847.jpg (168.3 KB, 0 views)
File Type: jpg 20200123_001852.jpg (151.3 KB, 0 views)
CP241 is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Club Car


Thread Tools
Display Modes


Similar Threads
Thread Forum
FE290 Loud After Rebuild Gas Club Car
FE290 Rebuild Gas Club Car
1993 FE290 rebuild...and more Gas Club Car
FE290 Engine Rebuild - Too tight to Turn Over Gas Club Car
help fe290 rebuild Gas Club Car


All times are GMT -5. The time now is 10:39 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.