|
02-18-2020, 12:04 AM
|
#1 |
|
Not Yet Wild
Join Date: Jan 2020
Posts: 35
|
Par car summit motor
Hey guys does this motor look repairabl? The stator looks burnt and The brushes are totally frozen in the housings. Dont want to spend alot of time on it if is to far gone. Also any leads on a good working used motor or a reasonably priced new motor.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
02-20-2020, 10:59 PM
|
#2 |
|
Not Yet Wild
Join Date: Jan 2020
Posts: 35
|
Re: Par car summit motor
Here's where I'm at now. Waiting on parts from this sites sponsor.
Hope to be hitting the greens soon. |
|
|
|
|
02-20-2020, 11:41 PM
|
#3 |
|
Not Yet Wild
Join Date: Jan 2020
Posts: 35
|
Re: Par car summit motor
|
|
|
|
|
02-20-2020, 11:42 PM
|
#4 |
|
Not Yet Wild
Join Date: Jan 2020
Posts: 35
|
Re: Par car summit motor
Cant figure out how to add pics. Any tips?
|
|
|
|
|
02-21-2020, 07:26 PM
|
#5 |
|
Gone Wild
Join Date: May 2015
Location: Central Florida
Posts: 2,022
|
Re: Par car summit motor
Its repairable. Stuck brushes is common on a par car motor that sits. The rest of it will clean up
|
|
|
|
|
02-21-2020, 09:23 PM
|
#6 |
|
Not Yet Wild
Join Date: Jan 2020
Posts: 35
|
Re: Par car summit motor
Sweet thanks. I was more concerned about the burned appearance of the armature. Side opposite the commutator. Seems like it was rubbing the inside of the field coil. Did manage to chuck the armature up in my buddies vintage craftsman lathe and clean up the commutator to a beautiful finish! The armature tested good, showing no spikes or drops in resistance between commutator bars and no shorts from bars to body. Ordered new brushes, brush holders, bearing and a new 24v solenoid. If I could figure out how to post some pics I would. Excuse the enthusiasm first dc motor build! Haha cheers
|
|
|
|
|
02-27-2020, 01:33 PM
|
#7 |
|
Not Yet Wild
Join Date: Jan 2020
Posts: 35
|
Re: Par car summit motor
Had a friend zinc blast housing and installed new
bearing, brushes and holder. Shes coming together! |
|
|
|
|
03-07-2020, 04:48 PM
|
#8 |
|
How Can I Help?
Join Date: Oct 2009
Location: SW Wisc & West Central, FL
Posts: 1,314
|
Re: Par car summit motor
You’ve done an awesome job cleaning up that armature!
|
|
|
|
|
03-07-2020, 11:44 PM
|
#9 |
|
Not Yet Wild
Join Date: Jan 2020
Posts: 35
|
Re: Par car summit motor
Thanks friend! Cant wait to get it back to my project. Hopefully she runs. If not I think it would be a controller issue? As I'm replacing 24v solenoid as well. Solenoid seemed iffy. After applying 24v the contacts would close but then sometimes it would (open) shortly after. Figure just change it to rule that out. When I put cart in forward gear with wheels off the ground I could hear a hum and the wheels would twitch very slightly.in Reverse the beeper came on but wheels never moved.
|
|
|
|
|
03-09-2020, 03:36 PM
|
#10 |
|
How Can I Help?
Join Date: Oct 2009
Location: SW Wisc & West Central, FL
Posts: 1,314
|
Re: Par car summit motor
From the way that motor looked before, I wouldn't be surprised if the controller was damaged too. Will keep fingers crossed that when you remount the motor and contactor it takes off like it should for you.
|
|
|
|
 |
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Lester Summit 2 | Electric Club Car | |||
| DPI or Summit 2 Charger | Electric EZGO | |||
| Summit Utility | Columbia ParCar | |||
| 180 summit | Electric Club Car | |||
| summit | Electric Yamaha | |||
Linear Mode
