04-10-2010, 12:55 PM | #1 |
Getting Wild
Join Date: Jan 2010
Posts: 96
|
fuses
have a 2006 club car Precent and hooked up a light kit once i pulled the switch to turn lights on it blew a fuse i have checked all that i see does anyone know where they are all at fuses? i have no pwer at all to the cart
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-10-2010, 01:11 PM | #2 | |
Ban Puppy Mills & Stores!
Join Date: Dec 2008
Location: SE Florida
Posts: 2,955
|
Re: fuses
Quote:
By the way it sounds like it wasn't a factory light kit since they use existing wiring harnesses. That fuse should not have blown and it might be that you have something wired wrong. Don't forget to let us know what you find. |
|
04-10-2010, 01:33 PM | #3 |
Getting Wild
Join Date: Jan 2010
Posts: 96
|
Re: fuses
Ok i have check and they are not blown from the looks of it any other ideals yes this was a kit they just plugged in back and then front and then dash just hook up to plugs and then the fuse from blue wire to red wire on battery is there a phone number i can call to have walk threw help :)
|
04-10-2010, 01:37 PM | #4 | |
Ban Puppy Mills & Stores!
Join Date: Dec 2008
Location: SE Florida
Posts: 2,955
|
Re: fuses
Quote:
If you have no power to the cart then one of those fuses is blown or possibly worse. Replace them both and remove the wire hookup from your lights and see if you have power back to the cart before you go forward with your light install. |
|
04-10-2010, 01:54 PM | #5 |
Getting Wild
Join Date: Jan 2010
Posts: 96
|
Re: fuses
the fuses look and i even replced them i unhooked the light kit and still have the power so not sure what muy next steop should be to find out what is wrong
|
04-10-2010, 02:03 PM | #6 | |
Ban Puppy Mills & Stores!
Join Date: Dec 2008
Location: SE Florida
Posts: 2,955
|
Re: fuses
Quote:
I can't quite understand what you just said: Did you replace both fuses? Do you now have power to the cart? Or is your cart still dead after you replaced fuses and removed the wiring harness for the light kit? |
|
04-10-2010, 02:07 PM | #7 |
Getting Wild
Join Date: Jan 2010
Posts: 96
|
Re: fuses
ok now have power to the cart but it looks like it blew the bulbs head light and taillight ? i hooked everything up the way it said harniss and all so not sure how the kit convets to 12 volt on a 48 volt system?
|
04-10-2010, 02:49 PM | #8 |
Gone Wild
Join Date: Mar 2009
Location: South Texas
Posts: 2,391
|
Re: fuses
Was your light kit a ( FACTORY ITEM ) or aftermarket kit? If it was a factory kit you might be able to get replacement repair parts IF wiring diagram was wrong ( GOOD LUCK )? It sounds like you have an incorrect connection that allows 48 volts to your 12 volt light system. If that is the case you will need to replace all bulbs and if used the flasher unit? Do you have a digital meter that you can use to confirm this problem by hooking to wiring on light switch back?
|
04-10-2010, 02:59 PM | #9 | |
Ban Puppy Mills & Stores!
Join Date: Dec 2008
Location: SE Florida
Posts: 2,955
|
Re: fuses
Quote:
Did you take the power off of the ignition switch which is 48v by mistake? My kit has LED's for the rear taillight and halogens for the front. As Old Mec says... first determine where you are pulling your power from, and you might be able to just replace the bulbs and flasher if aftermarket kit. |
|
04-10-2010, 07:26 PM | #10 |
Getting Wild
Join Date: Jan 2010
Posts: 96
|
Re: fuses
Ok update the wiring instructions said to hook to the red wire on number 4 battery and the red wire was on battery 1 what hooked to the red since it said red making a big 48volts goto them lights they blew i did get 2 new bulbs for front and works after i moved the wire to the number 4 battery blue wire so i sure hope they update there instructions to hook to blue wire plus the rear light are LED so they pretty much junk now ? thanks for all the help and if ever hooking a light kit up without a DC convertor use number 4 battery blue wire not red number 1 even thou it says red wire on 4 live and learn i guess
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Yamaha G9 Fuses | Gas Yamaha | |||
fuses | Gas Yamaha | |||
G1 popping fuses | Gas Yamaha | |||
Fuses on a g14? | Gas Yamaha | |||
burning out fuses | Electric Club Car |