|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
07-07-2009, 06:00 PM
|
#1 |
|
Gone Wild
 Join Date: May 2009
Location: Rock Hill SC
Posts: 349
|
working on G16 today
I am going to add a bed to the back so I took off the top. After i got it off I decided to go for a ride. It sounds 50% quieter than it does with the top on. I am thinking of keeping it off. I think I would want some kind of roll cage for safety sake. Anybody have some pics?
Added the bed today It is made for a 4 wheeler but I got it for $70 and it will still fit on my trailer. Ever sense I got it the first 50% of the gas peddle travel did not open the throttle. There was a lot of slack in the cable. I noticed the the bracket at the governor for the cable that goes to the peddle looked bent. I bent it back to where it looked correct and it took 90% out of the slack. I now have much better throttle response and gained 2 mph on the top end. I am up to 20 MPH . |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
07-07-2009, 06:41 PM
|
#2 |
|
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,052
|
Re: working on G16 today
The bed worked out well on there.
 |
|
Ron
 PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
|
|
|
|
07-07-2009, 06:47 PM
|
#3 |
|
Gone Wild
Join Date: May 2009
Location: Rock Hill SC
Posts: 349
|
Re: working on G16 today
I need to work up a gate and I think I will replace the expanded metal on the bottom with something a little stiffer. I have a smaller rack to put up front.
|
|
|
|
|
07-08-2009, 08:20 PM
|
#4 |
|
Not Yet Wild
Join Date: Jun 2008
Location: Jackson Tennessee
Posts: 39
|
Re: working on G16 today
Looks kinda familaur! Goor work, now just add one to the front and you'll be ready to roll!
|
|
|
|
|
07-08-2009, 08:32 PM
|
#5 | |
|
Gone Wild
Join Date: May 2009
Location: Rock Hill SC
Posts: 349
|
Re: working on G16 today
Quote:
|
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Got A New Cart Im Working On(help) | Gas golf carts | |||
| Working Under Carts | Electric Club Car | |||
| How Do I Know If My Charger Is Working??? | Electric Yamaha | |||
Linear Mode
