03-11-2007, 09:48 AM | #1 |
Gone Wild
Join Date: Dec 2006
Location: ComplainAboutNoNo'sProfile-Ville
Posts: 4,995
|
Drive Belt
I pose a conundrum to you all, a riddle if you will.
OK, The proper drive belt size for my cart is 1" wide by 37 3/8" inches long. Now, my question (I'm just looking for thoughts and input now so I can weigh each side) is this: Why couldn't I use a slightly wider belt (helps performance) and one about 1" longer (it's a hair too tight now)? Here are a few specs of other belts: Club Car 1984-87 -- 15/16 x 37 1/4 (probably too narrow) Club Car 1988-91 -- 1 x 37 1/2 (it has all of 1/8" more length) Yamaha G-2-UP -- 1 3/16 x 39 (possibly too wide, but length is good) Ideas? Thoughts? Comments? NO BS! |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-11-2007, 12:47 PM | #2 |
Frog Hunter
Join Date: Dec 2006
Location: Little Rock, Ar
Posts: 1,161
|
Ok, the 1 3/16 belt wont work unless you want to run the belt on top of the driven clutch... ANd the 15/16 one will suck. I say buy a new 94c clutch and send urs to TOm for it to be machined for a 1 3/6 Belt. Total it shouldn't be over 300 bucks. Plus, there are alot more belt choices.
|
03-11-2007, 12:50 PM | #3 |
Guest
Posts: n/a
|
Is this a stock setup....if not we need to move it to Big Block Talk.
|
03-11-2007, 01:02 PM | #4 |
Gone Wild
Join Date: Dec 2006
Location: ComplainAboutNoNo'sProfile-Ville
Posts: 4,995
|
This is a stock setup, clutching anyway! Austin, I went to a LOT of trouble to make my stock Club Car clutch work, for the whole purpose of I did NOT want a Comet clutch. I have to keep the Club Car one for the pedal start. I knew the 15/16" would not work, but the length was right. But I got what I was looking for--opinions. Does anyone have an idea other than these?
|
06-05-2010, 05:19 PM | #5 |
Not Yet Wild
Join Date: Feb 2010
Posts: 4
|
Re: Drive Belt
i have a 1990 cc ds does anyone know where i can get a good belt. the belt size is 1x37.50
|
06-05-2010, 05:28 PM | #6 |
Not Yet Wild
Join Date: Feb 2010
Posts: 4
|
Re: Drive Belt
well i am waiting for a reply on the belt i will pose another ? i have a 1992 cc and the motor is shot so i was told by the owner now i am looking to hotrod this one but would like to keep stock all but the motor this is a gas modal what size motor would you cart guys go with or type looking for speed as well as power going to be a winter thing to do here in maine
|
06-07-2010, 07:56 AM | #7 |
Gone Crazy
Join Date: Jan 2007
Location: Chesterfield, Va
Posts: 6,021
|
Re: Drive Belt
This original post is over three years old, might want to start your own thread for some fresh looks.
|
06-07-2010, 08:03 AM | #8 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Drive Belt
Bwaahaaa He hijacks a thread that is over 3 yrs dormant......
|
06-07-2010, 09:54 AM | #9 |
Raised by coyotes
Join Date: Nov 2008
Location: Central Texas
Posts: 5,658
|
Re: Drive Belt
|
06-07-2010, 05:20 PM | #10 |
Gone Crazy
Join Date: Jan 2007
Location: Chesterfield, Va
Posts: 6,021
|
Re: Drive Belt
me too!
|