10-24-2013, 04:54 PM | #1 |
Not Yet Wild
Join Date: Apr 2012
Location: Eastlake Ohio
Posts: 13
|
Ezgo txt governor
Is it true that by compresing the spring for the foot throttle cable that the cart will go faster? Are there any other adjustments? I'm including a photo of my set up.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-24-2013, 06:41 PM | #2 |
Gone Wild
Join Date: Jun 2011
Posts: 441
|
Re: Ezgo txt governor
Yes. I used a wrench and tightened mine down all the way. My cart would run 27 mph.
|
10-24-2013, 06:48 PM | #3 |
Not Yet Wild
Join Date: Apr 2012
Location: Eastlake Ohio
Posts: 13
|
Re: Ezgo txt governor
Wow that is considerably faster. I will have to see what happens to my speed when I tighten mine down. Thanks.
|
10-24-2013, 06:51 PM | #4 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: Ezgo txt governor
|
10-24-2013, 07:00 PM | #5 |
Gone Wild
Join Date: Jun 2011
Posts: 441
|
Re: Ezgo txt governor
|
10-25-2013, 09:51 AM | #6 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,188
|
Re: Ezgo txt governor
If you just want to test it take a piece of 1/4 fuel hose and cut it to the length you want to compress it. Slit it down the side and slip it over the rod between the cup washer and the nut. Zip tie the ends to keep it closed. A half inch is usually a good length to start with but like was said, be careful not to over rev..
Oh and this method makes it easy to take it back out quickly if needed.. |
|
|
Similar Threads | ||||
Thread | Forum | |||
1988 ezgo governor help | Gas EZGO | |||
Ezgo governor arm question! | Gas EZGO | |||
EZGO Gas Rear End Governor | Gas EZGO | |||
86 ezgo governor adjustment | Gas EZGO | |||
88 ezgo governor cable | Gas EZGO |