lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Yamaha
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles



Post New Thread  Reply
 
Thread Tools Display Modes
Old 06-12-2016, 07:20 PM   #1
ToolExpressDude
Not Yet Wild
 
Join Date: Apr 2016
Posts: 18
Default G1 clutch cover re-assembly help!

Hi guys. Thanks for the help in replacing my crankshaft seals, its running great..... Saturday I was trying to uproot some old azaleas by pulling backwards with my G1 and the clutch assembly unscrewed itself. And now even tho I was able to re assemble it a couple of months ago, I CANNOT seem to get the clutch cover back on. The pivoting weights dont seem to allow me to reseat it completely on the splines to then let me screw the long bolt back in. Any suggestions? I tried a rubber band with some dental floss attached but still no luck. Thanks!
ToolExpressDude is offline   Reply With Quote
Old 06-12-2016, 09:53 PM   #2
danman
Gone Wild
 
danman's Avatar
Yamaha
 
Join Date: Dec 2012
Location: Tennessee
Posts: 441
Default Re: G1 clutch cover re-assembly help!

Hmmm. That is interesting.

Hopefully nothing inside the clutch was damaged when you managed to back it off.

Can you take a pic with the cover off and upload it here? It might help identify if any weights or mounting points were damaged, creating an issue for the cover to slide back on.
danman is offline   Reply With Quote
Old 06-14-2016, 07:39 PM   #3
ToolExpressDude
Not Yet Wild
 
Join Date: Apr 2016
Posts: 18
Default Re: G1 clutch cover re-assembly help!

Well, guys, I figured it out. I had the cover turned a few degrees and that was enough to prevent it from seating. Can't believe I didn't see that because I thought I was wiggling it back and forth. Oh well, thanks again.
ToolExpressDude is offline   Reply With Quote
Old 06-14-2016, 08:40 PM   #4
danman
Gone Wild
 
danman's Avatar
Yamaha
 
Join Date: Dec 2012
Location: Tennessee
Posts: 441
Default Re: G1 clutch cover re-assembly help!

Glad it was a simple fix
danman is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Yamaha


Thread Tools
Display Modes


Similar Threads
Thread Forum
FnR assembly cover Electric EZGO
Help to ID this clutch assembly Big Block Talk!
Front Clutch Assembly Gas Yamaha
Driven clutch dust cover very close to engine air cover Gas EZGO
Clutch assembly Golf Carts and Parts


All times are GMT -5. The time now is 04:28 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. 2006-2017 Buggiesgonewild.com. All rights reserved.