new starter/generator on g29 and now its not running well. any ideas?

[CustomGolfCartGuy]

Originally Posted by smallblock450sl

Seems to only happen to EFI car's, mostly fleet use car's. One of the wires, (red/green/black) brakes off right at the metal clip installed into the plastic AVR plug. Yamaha did come out with a wire harness "Fix" kit for it. Now if they could just do the same for "error code 22 (as I recall) "air temperature sensor" wire harness problem.

Yes sir, you sound familiar with this fun repair as well lol. Only every seems to have the overcrimping on efi carts

[CustomGolfCartGuy]

Originally Posted by Golf cart guy

All you had to say was NIVEL.

I'm curious about the over crimp you talk about. Ive worked on hundreds of the G29 and have not seen this yet. Do you have a picture of this? Thanks in advance

Happens mostly on efi carts, the wires will just break off right at the voltage regulator plug in. I've done a few of them because a local course here has a fleet of efis. Had to change 4 ecus in them as well. Ecus go bad and the cart just gets no spark.