|
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
10-25-2021, 09:02 PM | #1 |
Not Yet Wild
Join Date: Jun 2018
Posts: 61
|
New Navitas 600 amp contoler in 2012 G29 ISSUE
Installed a Navitas 600 amp controller in a 2012 G29 48 volt cart. I am not getting and throttle % on the dashboard app. Throttle voltage is .39 with no pedal and .4 with gas pedal pushed. I replaced the throttle position sensor with same result. Any suggestions?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-25-2021, 09:44 PM | #2 |
Gone Wild
Join Date: May 2012
Location: Rio Verde, Az
Posts: 7,170
|
Re: New Navitas 600 amp contoler in 2012 G29 ISSUE
I'm pretty sure that the throttle should be 0 - 5 Volts on a G29. At least it is with stock and with Alltrax controller. I don't know anything about Navitas but Alltrax controllers need to be programmed for the correct throttle input. I would get with Navitas to resolve this.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Club Car Precedent Navitas A/C Issue | Electric Club Car | |||
1998 EZGO 36v (Series) Navitas Controller Issue | Electric EZGO | |||
Navitas controller tac2 / voltage meter issue | Electric EZGO | |||
Navitas Controller Issue | Electric Club Car | |||
Ezgo Pds solenoid contoler problem> | Electric EZGO |