lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Modified Golf Carts > Big Block Talk!
Big Block Talk! Everything about swapping a big block engine into your cart!

Post New Thread  Reply
Thread Tools Display Modes
Old 12-12-2011, 04:33 PM   #1
Getting Wild
Join Date: Jul 2010
Posts: 75
Default Muffler Question?

I put a Blue max 16hp engine in my Cushman and bought mandrell bent 1.25 tubing and welded up the head pipe and welded it to a stock muffler off of a 295cc robin engine that has a 1.25 pipe going into the muffler and a 5/8 tail pipe coming out of it. The motor seems to lay down about 2900-3000 rpm. Do you think the stock tail pipe is the bottle neck? I think I can cut the muffler and replace the 5/8 tail pipe with a 1.25 pipe like the rest of the exhaust system. Does this seem reasonable or do you think it will drastically reduce the efficiency of the muffler?? should I do a 1.00" instead??
kzunell is offline   Reply With Quote
Alt Today

Golf car forum Sponsored Links

This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
Old 12-12-2011, 11:21 PM   #2
Love my Big Block
csason's Avatar
Join Date: Oct 2009
Location: Florida
Posts: 1,553
Default Re: Muffler Question?

If you go to the EZ GO gas *section* on the home page of the forum, you will see a section about *mods* somewhere in there..and there is a good one on that muffler.

If it was me, I would not use it, because it is not designed for large volume outflow at fact, that seems to be the opposite of the design of that has a large expansion chamber and a small outlet..and it usually fits a 9 hp, or at most, an 11 hp of the stock Robin motor.

Yours , by it's very nature, sizewise, is too much volume of exhaust for that could mod it for time being, but I would try to come up with something that doesn't hamper it's outflow.
csason is offline   Reply With Quote
Go Back   Buggies Gone Wild Golf Cart Forum > Modified Golf Carts > Big Block Talk!

Thread Tools
Display Modes

Similar Threads
Thread Forum
Marathon Muffler question Gas EZGO
muffler - oil pump connection question Gas Yamaha
1982 EZGO 2pg muffler question Gas EZGO
Muffler question after rebuild Gas EZGO
muffler question Gas EZGO

All times are GMT -5. The time now is 08:05 PM.

Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
This Website and forum is the property of No material may be taken or duplicated in part or full without prior written consent of the owners of 2006-2017 All rights reserved.