|
07-28-2012, 06:33 AM
|
#1 |
|
Not Yet Wild
Join Date: Jul 2012
Location: NC
Posts: 54
|
homemade lift
any one have a starting point for 1994 cc ds lift kit fab.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
07-31-2012, 11:07 PM
|
#2 |
|
Not Yet Wild
Join Date: Apr 2012
Location: G A R A G E..
Posts: 20
|
Re: homemade lift
i am rebuilding my carryall 1, i am looking into build a long travel lift kit for it..
what kind of lift kit you have in mind? |
|
|
|
|
08-02-2012, 06:34 AM
|
#3 |
|
Not Yet Wild
Join Date: Jul 2012
Location: NC
Posts: 54
|
Re: homemade lift
one that makes it higher. lol excuse my ignorance but im not sure . really prob one like an a arm lift. anyone just reverse springs and or put them on top of the axle in rear then extend spindle in front?
|
|
|
|
|
08-02-2012, 09:25 PM
|
#4 |
|
Not Yet Wild
Join Date: Apr 2012
Location: G A R A G E..
Posts: 20
|
Re: homemade lift
1st.(i did the spring over on the back.and a block from autozone
2nd.(i did fabricate a 8x8x4x 1/4 thick block the i did put in between the spring and the frame.drill couple of hole into the plate so it will holld the upper arm in the stock position.get new shock and that takes care of the front. this was in my 92 carryall1, took it all apart because i go to the sand dunes ,and dont like the stock ride i like a little more soft ride. i've been sick the last couple weeks (worst flu ever)but getting better i will start doing it,maybe next week (maybe) |
|
|
|
 |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Homemade G14 lift | Lifted Golf Carts | |||
| Homemade lift kit | Gas EZGO | |||
| help with homemade lift | Lifted Golf Carts | |||
| homemade lift kit | Lifted Golf Carts | |||
| homemade lift kit? | Gas EZGO | |||
Linear Mode
