lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas EZGO
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
 
Thread Tools Display Modes
Old 02-03-2013, 07:46 PM   #1
NCWTS66
Not Yet Wild
 
Join Date: Feb 2013
Posts: 4
Default 4 pin 3 position ignition switch wiring diagram

Having problems figuring what color wires go were on the back of the switch. Its a 2003 txt gas. Thanks for the help.
B1=? B=? L=? I=?
NCWTS66 is offline   Reply With Quote
Old 02-03-2013, 09:20 PM   #2
NCWTS66
Not Yet Wild
 
Join Date: Feb 2013
Posts: 4
Default Re: 4 pin 3 position ignition switch wiring diagram

Bump
NCWTS66 is offline   Reply With Quote
Old 02-03-2013, 09:36 PM   #3
Madman415
Gone Wild
 
Madman415's Avatar
E-Z-GO
 
Join Date: Nov 2009
Location: Pleasanton, Texas
Posts: 267
Default Re: 4 pin 3 position ignition switch wiring diagram

diagram, never used one so I'm not sure. I figure it out like this:

Take an oHm meter, find two terminals that have resistance then don't have resistance when the key switch is turned from off to the first click

Then do the same to figure out which two have, then don't have resistance only when the key is in the second position.

The factory blue and red should be on the two that work off the first position and your accessory should be connected to the other two.
If you're hooking up lights to the accessory position, power the lights and have the switch work the ground, not the power.
Madman415 is offline   Reply With Quote
Old 02-05-2013, 09:39 PM   #4
NCWTS66
Not Yet Wild
 
Join Date: Feb 2013
Posts: 4
Default Re: 4 pin 3 position ignition switch wiring diagram

Bump
NCWTS66 is offline   Reply With Quote
Old 02-05-2013, 09:47 PM   #5
kgsc
Gone Wild
 
kgsc's Avatar
Mixed Breed
 
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,005
Default Re: 4 pin 3 position ignition switch wiring diagram

ok, this is strictly from memory but... If you look at the back of the switch in the position it would be in the dash I think the two right most terminals are for the lights. I believe B1 and L for lights and B and I for ignition.

Now for colors... If it is a factory wiring harness I think the headlights are white with a blue stripe and the other two are green and blue ??
kgsc is offline   Reply With Quote
Old 07-10-2016, 10:51 AM   #6
Neo
Not Yet Wild
 
Neo's Avatar
E-Z-GO
 
Join Date: Jun 2016
Location: East of the Mississippi
Posts: 18
Default Re: 4 pin 3 position ignition switch wiring diagram

I know this post is old, but I'm working on the same thing... Here's a pic of mine before removing wires. This is on a 2016 TXT gas.

So it is Blue/white that's always hot goes to "L" then the other Blue/white goes to "B1" and then Light Blue goes to "I" then Green to "B"

Just thought this might help someone doing a search.
Attached Images
File Type: jpg image.jpg (84.2 KB, 0 views)
Neo is offline   Reply With Quote
Old 07-10-2016, 01:25 PM   #7
scottyb
Happy Carting
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 73,358
Default Re: 4 pin 3 position ignition switch wiring diagram

Here is the diagram version.
Attached Images
File Type: jpg Digital-Meter-Ezgo.jpg (139.3 KB, 0 views)
scottyb is offline   Reply With Quote
Old 08-21-2016, 01:27 PM   #8
TARider
Not Yet Wild
 
Join Date: Oct 2015
Posts: 33
Default

Quote:
Originally Posted by Neo View Post
I know this post is old, but I'm working on the same thing... Here's a pic of mine before removing wires. This is on a 2016 TXT gas.



So it is Blue/white that's always hot goes to "L" then the other Blue/white goes to "B1" and then Light Blue goes to "I" then Green to "B"



Just thought this might help someone doing a search.

Thanks for this! I was pulling out the center cubby today and 2 wires pulled off in the process. Your pic meant I didn't have to break out the multimeter and guess which they were.
TARider is offline   Reply With Quote
Old 07-06-2018, 12:10 PM   #9
nytiger010
Not Yet Wild
 
Join Date: Jul 2018
Posts: 1
Default Re: 4 pin 3 position ignition switch wiring diagram

I have a 2018 Ez Go Express L6 Gas and trying to wire a 3 position harley davidson switch as an added security feature. The problem is that the harley switch only has three wires and the ezgo switch has four wires and I'm not sure how to wire it/or if i can wire it using the harley switch. I have looked high and low for a diagram for the switch, and the image above in this thread seems to come from an electric cart? Any help would be appreciated.
nytiger010 is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
EZGO 3 Position Key Switch Wiring diagram Electric EZGO
Looking for wiring diagram to ignition switch Electric EZGO
84 ezgo and 3 Position Ignition Switch Gas EZGO
Wiring diagram for 3 position key switch Electric EZGO
3 position key switch wiring. Electric EZGO


All times are GMT -5. The time now is 01:53 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.