Nivel Clutch

todwil · 05-14-2012, 11:12 AM

Hello all,

I havent been here in a while but I have a question that maybe someone
here can answer. I did a BB swap for a local farmer about 6 years ago and
now he's run the rear clutch so long that the ramps are worn down to the
bolt heads and helix has been reshaped so my question is Has anyone opted
for the aftermarket driven clutch or should we stick with factory I see the
prices have gone way up since I replaced the one on mine?

Thanx
Todd

PS Heres a pic of what I been doing with my spare time 36er mountain bike.

DSC00153.JPG

TheNewGuy · 05-14-2012, 01:07 PM

Good to see you Todd.

IMO I wouldn't waste money on the Chinese knock offs.

smallblock450sl · 05-14-2012, 06:36 PM

Great to see you post again

Did you use the spacer (in place of the circlip, when you built it?), I've seen many a spring seat damaged when the circlip walked toward the transaxle case. I only use OEM, but then I'm a dealer. Don't be such a stranger

todwil · 05-14-2012, 09:40 PM

The clutch just got used till it wouldn't go anymore I went ahead and got the
OEM driven clutch....cart is one with the world again! I've lurked a whole bunch But I haven't even driven my cart in a year. I'll stop by every now and
Again to keep up on things!

csason · 05-15-2012, 03:03 AM

wat up todd

I bought a 28 degree from the shop EZ go site for a decent price, to be honest, but I see you solved it..

I got into biking for a while..till my ex ran off with the mailman and took my bike in the process.. lOL

WB to the board..

05-14-2012, 11:12 AM	#1
todwil TOD WILD Join Date: Nov 2007 Location: YUMA AZ Posts: 666	Nivel Clutch Hello all, I havent been here in a while but I have a question that maybe someone here can answer. I did a BB swap for a local farmer about 6 years ago and now he's run the rear clutch so long that the ramps are worn down to the bolt heads and helix has been reshaped so my question is Has anyone opted for the aftermarket driven clutch or should we stick with factory I see the prices have gone way up since I replaced the one on mine? Thanx Todd PS Heres a pic of what I been doing with my spare time 36er mountain bike. DSC00153.JPG

05-14-2012, 01:07 PM	#2
TheNewGuy Admin/Moderator Join Date: Dec 2006 Location: Ohio Posts: 18,052	Re: Nivel Clutch Good to see you Todd. IMO I wouldn't waste money on the Chinese knock offs.
	Ron PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project

05-14-2012, 06:36 PM	#3
smallblock450sl Sometime's............ Join Date: Oct 2007 Location: Tacoma Washington Posts: 11,875	Re: Nivel Clutch Great to see you post again Did you use the spacer (in place of the circlip, when you built it?), I've seen many a spring seat damaged when the circlip walked toward the transaxle case. I only use OEM, but then I'm a dealer. Don't be such a stranger

05-14-2012, 09:40 PM	#4
todwil TOD WILD Join Date: Nov 2007 Location: YUMA AZ Posts: 666	Re: Nivel Clutch The clutch just got used till it wouldn't go anymore I went ahead and got the OEM driven clutch....cart is one with the world again! I've lurked a whole bunch But I haven't even driven my cart in a year. I'll stop by every now and Again to keep up on things!

05-15-2012, 03:03 AM	#5
csason Love my Big Block Join Date: Oct 2009 Location: Florida Posts: 1,553	Re: Nivel Clutch wat up todd I bought a 28 degree from the shop EZ go site for a decent price, to be honest, but I see you solved it.. I got into biking for a while..till my ex ran off with the mailman and took my bike in the process.. lOL WB to the board..

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

Similar Threads
Thread	Forum
Nivel buys Gateway!	Announcements