|
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
09-08-2015, 07:20 PM | #1 |
Not Yet Wild
Join Date: Aug 2015
Posts: 51
|
Still need support not running g9
yamaha 94 G9e
I tested the motor and it works checked all wiring cleaned all wiring Only 1 fuse and its good using meter with peddle pressed 1. Solenoid clicks 2. 2 top post meter reads 16.4 3. 2 small post read 0 4. all over connections read 0 , rev/forward switch, motor a2 s2 - s1 s2 same result in forward or reverse peddle released 1. 2 top post meter reads 0 2. 2 small post read 38.4 3. all over connections read 0 , rev/forward switch, motor a2 s2 - s1 s2 same result in forward or reverse |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-09-2015, 10:04 AM | #2 |
Not Yet Wild
Join Date: Aug 2015
Posts: 51
|
Re: Still need support not running g9
help from any buddy
Rechecked all wiring, it's correct and tight New fuse to just trying any thing Fuse is getting 38v Relay showing 0 How do i test controll panel? |
09-09-2015, 04:35 PM | #3 |
Not Yet Wild
Join Date: Aug 2015
Posts: 51
|
Re: Still need support not running g9
Took speed controller box apart
No burnt or corroded wires all looks like new There is an + and - the + side runs to selinoid - side and I have connection If I use meter on + and - on controller box it shows no power if pedal is pressed or not Please people running out of what to look at |
09-12-2015, 07:52 AM | #4 |
South LA Coonass
Join Date: Mar 2014
Location: New Iberia, LA
Posts: 531
|
Re: Still need support not running g9
Does your multimeter have a diode test setting? Your G9 has two diodes like my G8 and one or both could be bad. Check power at the micro switch on the bottom of the f/r switch.
|
09-14-2015, 10:46 AM | #5 |
Not Yet Wild
Join Date: Aug 2015
Posts: 51
|
Re: Still need support not running g9
well I did a couple of test thinking pictures will explain better and tell me if I am doing it correct
|
09-14-2015, 10:47 AM | #6 |
Not Yet Wild
Join Date: Aug 2015
Posts: 51
|
Re: Still need support not running g9
more pics
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Running wires through roof support bars? | Design Center | |||
Anyone cut rear support bar? | Gas Yamaha | |||
Jim, rear top support. | Gas Yamaha | |||
Looking for support | Gas Columbia ParCar | |||
96 c.c. top support | Golf Carts and Parts |