|
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
10-15-2015, 07:53 AM | #1 |
Not Yet Wild
Join Date: Jan 2015
Posts: 28
|
95 or 96 electric 36v, what alltrax controller do i need for more torque
I have a 95 or 96 Yamaha 36v cart. After riding for 5 min or so it shuts off. I wait a few min and it will run again for a couple min then shutoff. I have been told the controller is starting to fail and that it is over heating and shutting itself off.
If I am going to replace the controller I might as well upgrade right? What amp controller should I get? Do I need to replace the solenoid too? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-15-2015, 08:43 AM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,410
|
Re: 95 or 96 electric 36v, what alltrax controller do i need for more torque
I have hundreds of customers running a 500 amp control with this stock motor on 36 and 48v. Performance is greatly improved. You need to upgrade the whole amperage delivery system.
The amperage delivery system is every part between the batteries (power) and the motor (consumption). In a series drive cart this list includes the: Controller Solenoid F&R switch 13 cables Everything must be properly matched or a weak point is built in. Typically we use the Alltrax or FSIP 500a control A Superduty 200 or 400 amp Solenoid (depending upon anticipated loads) Our HD F&R switch 2g cable set |
10-15-2015, 11:58 AM | #3 |
Not Yet Wild
Join Date: Jan 2015
Posts: 28
|
Re: 95 or 96 electric 36v, what alltrax controller do i need for more torque
Is this the one I need?
|
10-15-2015, 12:22 PM | #4 |
Not Yet Wild
Join Date: Jan 2015
Posts: 28
|
Re: 95 or 96 electric 36v, what alltrax controller do i need for more torque
Or can you send me a quote on the parts I need? I just noticed the banner under your post.
|
10-15-2015, 02:34 PM | #5 |
Gone Wild
Join Date: Jul 2015
Location: Texas
Posts: 223
|
Re: 95 or 96 electric 36v, what alltrax controller do i need for more torque
|
10-15-2015, 03:38 PM | #6 |
Not Yet Wild
Join Date: Jan 2015
Posts: 28
|
Re: 95 or 96 electric 36v, what alltrax controller do i need for more torque
Is the 486 pkg still out of stock?
|
10-15-2015, 05:23 PM | #7 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,410
|
Re: 95 or 96 electric 36v, what alltrax controller do i need for more torque
|
10-15-2015, 09:29 PM | #8 |
Not Yet Wild
Join Date: Jan 2015
Posts: 28
|
Re: 95 or 96 electric 36v, what alltrax controller do i need for more torque
When I click on buy now it says there is an error.
|
10-15-2015, 09:55 PM | #9 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,410
|
Re: 95 or 96 electric 36v, what alltrax controller do i need for more torque
The old website has a problem with some mobile phone service carriers. Try a PC or desktop.
The new mobile friendly cartsunlimited.net will be up in a matter of weeks. Thanks for bearing with us. |
10-16-2015, 06:55 AM | #10 |
Not Yet Wild
Join Date: Jan 2015
Posts: 28
|
Re: 95 or 96 electric 36v, what alltrax controller do i need for more torque
There is no option for Yamaha on the 485
|
|
|
Similar Threads | ||||
Thread | Forum | |||
alltrax 500 vs curtis 500 iq precedent speed/torque | Electric Club Car | |||
Alltrax DCX400 Speed and Torque Question | Electric EZGO | |||
Alltrax 400 amp need more torque....bad | Electric Club Car | |||
Alltrax DCX 500 Controller, D&D torque Motor | Golf Carts and Parts | |||
PQ torque motor, alltrax 500 won't go!!! | Extreme DC! |