Increasing Torque On G29

Volt_Ampere · 07-27-2016, 08:54 AM

If you go with Alltrax I would go with more current than you think you need because you can set the current limit to anything you want with their PC program. Then if you upgrade and want more current, you have it available. The controller will be more reliable and run cooler that way too.

Unsoshl · 07-27-2016, 05:07 PM

xcntrk, 28 mph on a stock motor w/the xct 500? On my 2010 ydre I went with a high speed/banded motor from Electrical Motor Products, xct 400, 4 gauge cables, stock tires and I'm only at 26 mph. Apparently I wasted $600 on a motor that wasn't necessary for speed on flat ground? EMP told me to peg the xct at 8000 rpm, which is what I did. Can't imagine the bigger tires you have would make that big of a difference, so is it just the xct 500 vs 400?

cgtech · 07-28-2016, 12:02 AM

he must have larger tires. the stock motor is only capable of 22mph on stock tires.

xcntrk · 07-28-2016, 06:28 AM

Quote:

Originally Posted by cgtech

he must have larger tires. the stock motor is only capable of 22mph on stock tires.

Yes, I said right in my post 22" tires. On 20" tires it was 24mph. Here's the specs and pics:
http://www.buggiesgonewild.com/membe...shoes-g29.html

07-27-2016, 08:54 AM	#11
Volt_Ampere Gone Wild Join Date: May 2012 Location: Rio Verde, Az Posts: 7,165	Re: Increasing Torque On G29 If you go with Alltrax I would go with more current than you think you need because you can set the current limit to anything you want with their PC program. Then if you upgrade and want more current, you have it available. The controller will be more reliable and run cooler that way too.

07-27-2016, 05:07 PM	#12
Unsoshl Gone Wild Join Date: May 2016 Location: California Posts: 210	Re: Increasing Torque On G29 xcntrk, 28 mph on a stock motor w/the xct 500? On my 2010 ydre I went with a high speed/banded motor from Electrical Motor Products, xct 400, 4 gauge cables, stock tires and I'm only at 26 mph. Apparently I wasted $600 on a motor that wasn't necessary for speed on flat ground? EMP told me to peg the xct at 8000 rpm, which is what I did. Can't imagine the bigger tires you have would make that big of a difference, so is it just the xct 500 vs 400?

07-28-2016, 12:02 AM	#13
cgtech Over This Interview Is... Join Date: Jun 2012 Location: AZ Posts: 17,449	Re: Increasing Torque On G29 he must have larger tires. the stock motor is only capable of 22mph on stock tires.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
increasing speed	Gas Club Car
Increasing speed in 1992	Gas EZGO
increasing spark on g16	Gas Yamaha
Increasing Speed?	Electric Club Car

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum