|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
06-19-2017, 05:01 PM
|
#1 |
|
Not Yet Wild
Join Date: May 2017
Posts: 33
|
1986 marathon. I replaced the wires, the resistor, the switchboard with all new con
Please help
Sent from my SAMSUNG-SM-G930A using Tapatalk |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
06-19-2017, 08:28 PM
|
#2 |
|
Guest
Posts: n/a
|
Re: 1986 marathon. I replaced the wires, the resistor, the switchboard with all new
please tell us the problem
just asking for help is not enough |
|
|
|
06-19-2017, 08:32 PM
|
#3 |
|
Not Yet Wild
Join Date: May 2017
Posts: 33
|
Re: 1986 marathon. I replaced the wires, the resistor, the switchboard with all new
For some reason it got cut off. I replaced the switchboard, the resistor, all the contacts, the sweeper and all the cables. When I turn the key on the cart starts creep. Did not replace the solenoid, I'm thinking that may be it?
Sent from my SAMSUNG-SM-G930A using Tapatalk |
|
|
|
|
06-19-2017, 08:50 PM
|
#4 |
|
Guest
Posts: n/a
|
Re: 1986 marathon. I replaced the wires, the resistor, the switchboard with all new
yes it is welded shut
will the cart run as you press the go pedal ? aleo the sweeper arm is not going to bottom position  |
|
|
|
06-19-2017, 08:52 PM
|
#5 |
|
Not Yet Wild
Join Date: May 2017
Posts: 33
|
Re: 1986 marathon. I replaced the wires, the resistor, the switchboard with all new
It will, but not quite right and it sparks a little
Sent from my SAMSUNG-SM-G930A using Tapatalk |
|
|
|
|
06-19-2017, 09:09 PM
|
#6 |
|
Guest
Posts: n/a
|
Re: 1986 marathon. I replaced the wires, the resistor, the switchboard with all new
replace the solenoid and adjust the sweeper arm if you can
|
|
|
|
06-19-2017, 09:11 PM
|
#7 |
|
Not Yet Wild
Join Date: May 2017
Posts: 33
|
Re: 1986 marathon. I replaced the wires, the resistor, the switchboard with all new
Thanks for the help
Sent from my SAMSUNG-SM-G930A using Tapatalk |
|
|
|
|
06-19-2017, 09:20 PM
|
#8 |
|
Guest
Posts: n/a
|
Re: 1986 marathon. I replaced the wires, the resistor, the switchboard with all new
here is something that might help
 |
|
|
|
08-18-2017, 09:23 AM
|
#9 |
|
Not Yet Wild
Join Date: May 2017
Posts: 33
|
Re: 1986 marathon. I replaced the wires, the resistor, the switchboard with all new
I finally have cart working right but the go pedal gets stuck, any ideas?
Sent from my SAMSUNG-SM-G930A using Tapatalk |
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Replaced wires and now cart won't move. | Electric EZGO | |||
| Replaced 750 ohm resistor with a 680 and now cart won't budge | Electric Club Car | |||
| 1986 EZGO Marathon Resistor Coil Question | Electric EZGO | |||
| Problem with Resistor cart 1986 EZ-GO Marathon | Electric EZGO | |||
| 1986 Marathon Resistor $386? | Electric EZGO | |||
Linear Mode
