Windshield needed for 2007 Western

[Cwinmaster]

My husband inherited a Western golf cart. From what I read in another thread, based on the serial number it is a 2007 model 300. Any idea where we can get a new windshield? Anytime I try to Google it I only get EZ Go dealers.

[golf cart man]

You're getting ezgo dealers because the cart is built on an ezgo frame and drive system. Western carts usually have the windshields with the side wings for wind deflection. Hard to find these anymore sometimes you have to measure and find a windshield that is close and custom cut it. Western body parts like windshields, head and tail light lenses, etc. are impossible to find unless you can find a parts cart. Your best bet is to call dealers in the Palm Springs/ Rancho Mirage, CA area and see if they have any NOS left.

[Furyous]

That’s a tough find. You won’t find a new one, maybe get one from a junker on Craigslist if you can find it.

I had a customer bring me theirs and it needed a new windshield so I used a new Club Car DS windshield and cut it to fit. You have to drill holes in it to mount with the factory Western screws but it worked great.


Sent from my iPhone using Tapatalk

[Golf cart guy]

I may have a brand new still in the box PM me

[mastrich]

Anyone have manuals on 2005 western 400, im sure its ezgo pds system f/r switches on dash with rocker head light and meter.bought mine used and cables and wiring removed has 5 6 volts and 1 8 volt, which i thought was messed up. has que q 48 mounted under front end.controller was burnt up at the 10 pin connector and batteries at the terminals are raised looks like over voltage charge. wires under dash are chopped up and is a spaghetti mess.

[golf cart man]

duplicate

[golf cart man]

Originally Posted by mastrich

Anyone have manuals on 2005 western 400, im sure its ezgo pds system f/r switches on dash with rocker head light and meter.bought mine used and cables and wiring removed has 5 6 volts and 1 8 volt, which i thought was messed up. has que q 48 mounted under front end.controller was burnt up at the 10 pin connector and batteries at the terminals are raised looks like over voltage charge. wires under dash are chopped up and is a spaghetti mess.

I may have a wiring diagram for the 400. I will check for you tomorrow. five 5 volts and one 8 volt is certainly not right. These westerns were either 42 volt or 48 volt systems. Since everything is ruined this may be your chance to upgrade all your cables and electronics and have a totally new electrical system.

[golf cart man]

Originally Posted by mastrich

Anyone have manuals on 2005 western 400, im sure its ezgo pds system f/r switches on dash with rocker head light and meter.bought mine used and cables and wiring removed has 5 6 volts and 1 8 volt, which i thought was messed up. has que q 48 mounted under front end.controller was burnt up at the 10 pin connector and batteries at the terminals are raised looks like over voltage charge. wires under dash are chopped up and is a spaghetti mess.

I am attaching an owners manual for all westerns. The wiring diagrams are on the last few pages separated by model. I hope this helps.