|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
12-27-2019, 05:22 AM | #1 |
Not Yet Wild
Join Date: Jun 2016
Posts: 2
|
broken engine mount g29 drive
Can anyone tell me if you need to remove the engine to replace the engine mount on a drive2 gas cart. there is not much room down there and any advice would be handy
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-27-2019, 10:41 AM | #2 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: broken engine mount g29 drive
Remove the front body panel (behind the shifter handle), remove the Bagwell cover. Plan on loosening all the mounts, so as to not twist/damage the ones you dont intend on replacing.
|
12-29-2019, 12:11 PM | #3 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: broken engine mount g29 drive
Oh yeah, Drive 2 is not a G29 anymore, it's a DR2.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Broken Heatsink Mount - Problem? | On Road Golf Carts! | |||
Broken TXT engine frame and ISO mount cap picture | Gas EZGO | |||
Broken shackle mount extrusion | Gas Club Car | |||
new motor mount broken | Gas Yamaha | |||
Broken shackle mount | Electric EZGO |