|
Gas Club Car Gas DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
02-06-2010, 12:21 AM | #1 |
Getting Wild
Join Date: Apr 2009
Location: Pearland, TX (Houston Area)
Posts: 124
|
16 HP Honda Clone Idle Adjustment
Hey All! I'm back at it! I'm having a little trouble getting the idle down on the 16HP Powermax honda clone. From what I've found online, there's a pilot set screw near the bolt hole on the carb.
http://www.kedawei.com/Carb_exploded_view.pdf Problem is, mine doesn't have the limiter cap on it, and I don't think it ever did. I see no way of adjusting this screw or even any way to get it out. What has everyone else done to lower the idle on these motors? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-06-2010, 01:57 AM | #2 |
The Fabricator
Join Date: Dec 2006
Posts: 2,016
|
Re: 16 HP Honda Clone Idle Adjustment
Have you checked or adjusted the throttle cable? How is your cable attached to the motor's throttle linkage? There is an arm under the gas tank that controls the engine rpms. The closer it is pushed to the carb, the lower it should idle.
|
02-06-2010, 06:41 AM | #3 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,406
|
Re: 16 HP Honda Clone Idle Adjustment
The idle adjustment screw is #6 in the pic .... i found the one I had didn't want to idle at a very low speed ???
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Honda Clone Clutch | Gas golf carts | |||
idle adjustment | Gas Club Car | |||
20 HP V-twin Honda Clone | Big Block Talk! | |||
honda idle | Big Block Talk! | |||
club car honda clone swap | Big Block Talk! |