04-29-2013, 05:57 PM | #1 |
Not Yet Wild
Join Date: Apr 2013
Posts: 30
|
Roof strut hardware
I have a 2002 TXT that I bought without a roof. I now have a roof, and the roof supports/struts, but I do not have the bolts and/or spacers.
What thread are the front bolt holes, and what size spacers and where are they positioned (front only, or rear too?)? Thanks in advance, Louis |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-30-2013, 12:45 AM | #2 |
Not Yet Wild
Join Date: Apr 2013
Posts: 30
|
Re: Roof strut hardware
I needed an answer, so I started trying different bolts I had... lo and behold the front TXT chassis nuts (where the struts bolt on) are 5/16 course thread (5/16-18 ). The spacers needed are pretty obvious after the front strut is in place.
A word of advice if you buy the 3 piece front roof support/strut from E-Z-go: you must remove all the powder coating on the shafts that go into the middle section. I literally used my dremel to take it all off. If you don't, it will be a real PITA! Louis |
|
|
Similar Threads | ||||
Thread | Forum | |||
Looking for a roof and hardware for a g-9 | Gas Yamaha | |||
Need a top and strut rods | Gas Yamaha | |||
WTB - Rear roof strut for Yamaha G9 | Golf Carts and Parts | |||
Roof Strut Replacements | Electric Club Car | |||
WTB: Rear roof strut For 81-00 CC | Golf Carts and Parts |