|
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
11-07-2013, 02:22 PM | #11 |
Not Yet Wild
Join Date: Nov 2013
Posts: 12
|
Re: G19E with a part not on the wiring diagram
OK, I took the mystery part out of the loop. Now I have 42V to all points of the sol, into the controller, out of the controller, and aoo of the connections at the motor. No click when pressing gas pedal, but when I flip the run/tow stitch to tow for a few mins then flip it back to run the sol does click at the flip of the switch then about 15 seconds later the sol faintly clicks again. Should I get ANY type of action at 42V?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-07-2013, 04:22 PM | #12 |
Not Yet Wild
Join Date: Nov 2013
Posts: 12
|
Re: G19E with a part not on the wiring diagram
Anybody got any ideas?
|
11-07-2013, 06:51 PM | #13 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,875
|
Re: G19E with a part not on the wiring diagram
You must have 48+ volts for the controller and solenoid to work. Can you post pictures of the battery connections and the mistery box? It wasn't a OEM Yamaha part I've ever seen.
|
11-07-2013, 07:51 PM | #14 |
Not Yet Wild
Join Date: Nov 2013
Posts: 12
|
Re: G19E with a part not on the wiring diagram
This is the mystery part. |
11-07-2013, 11:08 PM | #15 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: G19E with a part not on the wiring diagram
Nevermind, WTH is that?
|
11-07-2013, 11:12 PM | #16 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: G19E with a part not on the wiring diagram
none of this stuff looks like stock g19 equipment, is that a curtis controller?
|
11-08-2013, 09:00 AM | #17 |
Not Yet Wild
Join Date: Nov 2013
Posts: 12
|
Re: G19E with a part not on the wiring diagram
The controller isnt in the pic but its a FSIP Controller in it now.
|
11-21-2013, 05:41 PM | #18 |
Not Yet Wild
Join Date: Nov 2013
Posts: 12
|
Re: G19E with a part not on the wiring diagram
No ideas???
|
11-21-2013, 08:15 PM | #19 |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,875
|
Re: G19E with a part not on the wiring diagram
Are there only 2 wires coming out of it? One to 48 volts positive and the other going to 48 volts negative? Saw a car this week that had what was called a "battery tender", but only had the 2 leads, that's just not right.
|
03-23-2015, 09:43 PM | #20 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,187
|
Re: G19E with a part not on the wiring diagram
It looks like a voltage reducer similar to a club car. Not saying this what you have but 16 volts go to the + of the lights, - of the lights go to one side of the reducer, the wire coming out goes to the - of the 16.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Yamaha G19E Electric Solenoid Wiring Issue | Electric Yamaha | |||
i have changed every part, and still no go g19E | Electric Yamaha | |||
Need Wiring Diagram for G19E | Electric Yamaha | |||
G2 Wiring harness Part # | Gas Yamaha | |||
melted wiring??! Can this part be replaced? | Gas Yamaha |