04-08-2013, 04:11 PM | #1 |
Not Yet Wild
Join Date: Apr 2013
Posts: 1
|
91 ez go quit firing
i have a 91 ez go txt 2 stroke tht just quit firing. any suggestions on how to test coil,igniter, and pulser to help determine which one is bad
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-09-2013, 06:44 AM | #2 |
Gone Wild
Join Date: Feb 2011
Posts: 1,515
|
Re: 91 ez go quit firing
First try removing the plug wire at the coil it will unscrew from the coil and cut about 3/4" of the wire off and reinstall or just get a new wire and install it. Screw it back in until it bottoms. Been known to fail now the igniter has no test and also are known to fail and this is where the HEI conversion comes in to play. There is a test for the pulser but I don't recall the proper ohm reading but I'm sure someone will chime in on that but they don't fail very often. First look for loose or broken wires this happens more than not..
LOU |
|
|
Similar Threads | ||||
Thread | Forum | |||
Back firing | Restoration | |||
g1 not firing | Gas Yamaha | |||
G14 Firing Problem | Gas Yamaha | |||
not firing | Gas EZGO | |||
G1 gets fuel and is firing | Gas Yamaha |