10-27-2014, 11:12 PM | #1 |
Not Yet Wild
Join Date: Oct 2014
Posts: 1
|
Kubota D662 install in Yamaha Cart
New here to the forum. I am just starting a project to install a Kubota D662 in a Yamaha gas cart. I have been looking for the best way to mount the clutch to the fly wheel and came across a bearing supported stub shaft made by Hayes for the D662.
If anyone has ever installed one and has any tips on the clutch to use I would appreciate the help. I'm a bit stumped as to how the belt drive will work on an engine that has to be running, unless there is a system that has a higher RMP engagement. Thanks |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-27-2014, 11:31 PM | #2 |
Not Yet Wild
Join Date: Oct 2014
Posts: 8
|
Re: Kubota D662 install in Yamaha Cart
Now that's my kind of conversion !!! DIESEL FUEL ONLY
|
10-28-2014, 11:13 AM | #3 |
rifter
Join Date: Nov 2007
Location: Orlando Florida
Posts: 4,055
|
Re: Kubota D662 install in Yamaha Cart
http://www.buggiesgonewild.com/big-b...ota-build.html
Here's how I did it. |
10-28-2014, 07:02 PM | #4 | |
nimda
Join Date: Jun 2007
Posts: 13,022
|
Re: Kubota D662 install in Yamaha Cart
Quote:
Club car used a kubota D722 in a few models of their carts/utility vehicles. They make a flywheel adapter to adapt to the taper shaft on our clutches. I don't have the part number handy right now but I'll post it later. I bought 2 adapters from Tahoedawg here on the forum and I also have A straight shaft flywheel adapter for 1 1/8th inch that I bought from kubota that came out of japan. Both just bolt to the Super mini series flywheel...Z482, D602, D662, etc etc all the way up to D902. You will have to play with weights in the clutch to get it to shift out properly....you may be able to get 4000 rpm out of it if you play with the fueling a bit. That engine will either be rated 3200 rpm or 3600 depending on injection timing....either will do 3600 easily. The flywheel you need that works with these adapters is the one that comes with the plain Jane no option engine....it will have a steel plate bolted to the back of the engine instead of a bell housing. 5 bolts for the flywheel then 5 threaded holes around the flywheel for the adapter. |
|
10-28-2014, 07:23 PM | #5 |
nimda
Join Date: Jun 2007
Posts: 13,022
|
Re: Kubota D662 install in Yamaha Cart
Club car P/N: 102465901 Shaft, CVT Adapter
Heres what it looks like. You do not need a support bearing. If you decide to call tahoedawgz71 or pm him keep in mind he will have to order it, it doesn't take long to get it though. Its not a common item so no one stocks it on the shelf. |
11-03-2014, 07:09 PM | #6 |
nimda
Join Date: Jun 2007
Posts: 13,022
|
Re: Kubota D662 install in Yamaha Cart
Kubota Super mini series flywheel
Club Car's Kubota CVT adapter Kubota 1.125 with .250 key straight shaft adapter. Kawasaki mule CVT with Club Car CVT adapter on Flywheel. |
08-23-2015, 08:44 AM | #7 |
Not Yet Wild
Join Date: Aug 2015
Posts: 1
|
Re: Kubota D662 install in Yamaha Cart
Where can I find the Kubota 1.125 with .250 key straight shaft adapter?
Part number? Thanks |
03-28-2017, 11:45 AM | #8 |
Not Yet Wild
Join Date: Mar 2017
Location: NJ
Posts: 1
|
Re: Kubota D662 install in Yamaha Cart
I'm really interested too in how you got that shaft adapter. Any info would be much appreciated.
Thank you! |
11-18-2021, 04:37 PM | #9 |
Not Yet Wild
Join Date: Nov 2021
Posts: 1
|
Re: Kubota D662 install in Yamaha Cart
I am interested myself lol wish I had a phone number to call someone about this issue.
|
11-19-2021, 03:52 PM | #10 |
Not Yet Wild
Join Date: Dec 2017
Posts: 40
|
Re: Kubota D662 install in Yamaha Cart
check out this guys ebay. i just bought one and it was a perfect fit for my d600.. 1 inch shaft, fits the 5 bolts on the flywheel. not sure how many he has
https://www.ebay.com/itm/27501958677...53.m2749.l2648 |
|
|
Similar Threads | ||||
Thread | Forum | |||
Kubota golf cart build, Nothing serious! | Diesel swaps | |||
help me on how to install 8:1 gears on a G2 yamaha electric golf cart | Electric Yamaha | |||
ezgo and a kubota | Big Block Talk! | |||
Yamaha to Kubota | Members Rides |