|
|
|||||||
| Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
01-11-2015, 02:13 PM
|
#1 |
|
Not Yet Wild
Join Date: Jan 2015
Location: virginia
Posts: 6
|
Marathon cross member help
I recently received a 1991 ezgo marathon gas for free and need some help deciding how to go about fixing a rusted out cross member. The square tubing on the drivers side is fine but the passenger side is rusted completely under the battery tray. Would it work if i were to weld in a new piece from the existing cross member to the passenger side frame rail or does the entire cross member need to be replaced? I was thinking of just welding in half for the passenger side and re-enforcing it to the frame rail. Any help is appreciated.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
01-11-2015, 03:37 PM
|
#2 |
|
Getting Wild
Join Date: Jun 2014
Posts: 142
|
Re: Marathon cross member help
I'd think you could just piece in what you need, then reinforce the whole thing...
Maybe sister another piece of tubing all the way across the front |
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| EZGO Marathon 4 cycle solenoid cross reference #? | Gas EZGO | |||
| Motor cross ref. | Electric Club Car | |||
| Cross bar support | Gas Club Car | |||
| New member with old marathon | Electric EZGO | |||
Linear Mode
