|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
01-12-2015, 09:58 PM | #1 |
Gone Wild
Join Date: Mar 2013
Posts: 495
|
Looking for some older Robyn engines
I am in North central Florida and I am looking for Robyn engine parts. I have an engine that broke a rod and damaged the block and I was just asking if anyone had any good suggestions on any thing.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-12-2015, 10:19 PM | #2 |
VC 460 CLONE GONE WILD
Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 10,644
|
Re: Looking for some older Robyn engines
With that much damage maybe put a vegascarts clone in?
|
01-12-2015, 10:37 PM | #3 |
Gone Wild
Join Date: Mar 2013
Posts: 495
|
Re: Looking for some older Robyn engines
Never heard of it
|
01-13-2015, 12:35 AM | #4 |
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: Looking for some older Robyn engines
They are sponsors here at BGW http://www.vegascarts.com/ Here's some threads about the motors http://www.buggiesgonewild.com/searc...3&pp=25&page=2 |
01-13-2015, 04:06 PM | #5 |
It ain't gonna be easy.
Join Date: Apr 2008
Location: St. George, SC
Posts: 1,480
|
Re: Looking for some older Robyn engines
My Robin did the same thing, rod broke and slapped the case causing a crack. I had a reputable welder TIG it for me. The heat from the TIG caused a slight warp in the mating surface of the case. I used a true flat surface and milled that area back to spec and haven't had any issues with it. The Vegas or CT Rebuild engine is a good choice if you want to drop in and go. It's really up to you and your budget.
|
01-13-2015, 05:09 PM | #6 |
VC 460 CLONE GONE WILD
Join Date: Oct 2014
Location: Ray BY The Bay NJ
Posts: 10,644
|
Re: Looking for some older Robyn engines
I was not aware of vegascarts either until I started searching ebay for parts for my smoking yamaha g14.But also not aware of buggies gone wild until I wanted some wiring advice on the clone.Then I caught clone fever or golf cart speed fever as not to include the vanny boys as maybe they have it worse than us clone boys.Also the honda and kohler crowd.I am afraid to read about the atv,sled,and cycle threads who knows what I might want to build next.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
engines | Golf Carts and Parts | |||
2007 ezgo 350 Robyn replacement motor recommendation | Gas EZGO | |||
Where to buy engines | Gas EZGO | |||
New 350 cc MCI engines Available!!!! | Gas EZGO | |||
Engines for the G9 | Big Block Talk! |