Controller question for my 2010 precedent

WayneMac · 05-06-2015, 10:58 AM

I have a 2010 Club car precedent that has the stock motor and 200amp controller on it. Im looking to upgrade the controller only right now so i can get a little more torque. I was told by a mechanic that Curtis makes a 500amp that plugs straight in and is pre programmed as well. He says i wont need to change solinoids or wires either. Is this true first of all and if so does anyone know exactly which controller he is speaking of before i purchase the wrong one? Thanks in advance!

Hecky50 · 05-06-2015, 11:26 AM

Quote:

Originally Posted by WayneMac

I have a 2010 Club car precedent that has the stock motor and 200amp controller on it. Im looking to upgrade the controller only right now so i can get a little more torque. I was told by a mechanic that Curtis makes a 500amp that plugs straight in and is pre programmed as well. He says i wont need to change solinoids or wires either. Is this true first of all and if so does anyone know exactly which controller he is speaking of before i purchase the wrong one? Thanks in advance!

I am no expert here but everything I have read here tells me you will need a new solenoid and to get max performance new cables. Also a 500 amp controller may be to much for your stock motor. YOu need to here from one of the experts here like Tahoedawg,JohnnieB or Scottyb they will steer you in the right direction.

jakesnake27 · 05-06-2015, 12:18 PM

What's your serial number Wayne? It could be either an Excel or IQ system. A cable upgrade will be needed for a 500 amp controller.

Also,

to BGW

TahoeDawgZ71 · 05-06-2015, 09:27 PM

You heard correct about the 500 amp conversion kit. You can get it programmed to work fine with the factory motor. I recommend a heavier cable set. 4 gauge at least. I like using 2 gauge.

05-06-2015, 10:58 AM	#1
WayneMac Not Yet Wild Join Date: May 2015 Posts: 21	Controller question for my 2010 precedent I have a 2010 Club car precedent that has the stock motor and 200amp controller on it. Im looking to upgrade the controller only right now so i can get a little more torque. I was told by a mechanic that Curtis makes a 500amp that plugs straight in and is pre programmed as well. He says i wont need to change solinoids or wires either. Is this true first of all and if so does anyone know exactly which controller he is speaking of before i purchase the wrong one? Thanks in advance!
WayneMac Not Yet Wild Join Date: May 2015 Posts: 21

05-06-2015, 12:18 PM	#3
jakesnake27 Gone Wild Join Date: Aug 2009 Posts: 14,245	Re: Controller question for my 2010 precedent What's your serial number Wayne? It could be either an Excel or IQ system. A cable upgrade will be needed for a 500 amp controller. Also, to BGW
jakesnake27 Gone Wild Join Date: Aug 2009 Posts: 14,245

05-06-2015, 09:27 PM	#4
TahoeDawgZ71 revolutiongolfcars.com Join Date: Mar 2010 Location: Golf Car Capital of The World... Augusta, Georgia Posts: 10,224	Re: Controller question for my 2010 precedent You heard correct about the 500 amp conversion kit. You can get it programmed to work fine with the factory motor. I recommend a heavier cable set. 4 gauge at least. I like using 2 gauge.

Similar Threads
Thread	Forum
2012 precedent Excel controller question	Electric Club Car
2010 Precedent Stock Controller Upgrade	Electric Club Car
2010 precedent 48v	Electric Club Car
2010 CC Precedent dash question	Electric Club Car
Precedent I2 Controller Question	Electric Club Car

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum