|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
09-07-2015, 04:49 PM | #1 |
Not Yet Wild
Join Date: Jul 2013
Posts: 26
|
Anyone ever cut open to repair a g16 muffler?
So I'm curious if anyone has cut open factory Yamaha g16 muffler to repair a rattling baffle? Should I go in through the top or the bottom? Anyone have an image of one cut open?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-08-2015, 09:35 AM | #2 |
Not Yet Wild
Join Date: Jul 2013
Posts: 26
|
Re: Anyone ever cut open to repair a g16 muffler?
I cut open the bottom of the Muffler. I found there are two chambers. A pipe that connects internally to the exhaust flange travels through the separator plate. The pipe has broken free from the plate (see picture). The tailpipe is still securely welded. I have welded the pipe back to the separator plate. I need to weld the can back up and install. Hope this repair works.
|
09-08-2015, 11:40 AM | #3 |
Not Yet Wild
Join Date: Mar 2014
Posts: 31
|
Re: Anyone ever cut open to repair a g16 muffler?
I think I have something loose in mine also
My cart sounds pretty loud whith the peddle to the floor Something rattling in there As soon as I let off its gone Not too bad at half throttle Same question Do I cut the top or bottom Maybe both Any other mods while I have it off and cut up Thanks |
09-08-2015, 12:28 PM | #4 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Anyone ever cut open to repair a g16 muffler?
Well, he cut the bottom of his, and believes he found the problem......
|
09-08-2015, 01:13 PM | #5 |
Not Yet Wild
Join Date: Jul 2013
Posts: 26
|
Re: Anyone ever cut open to repair a g16 muffler?
Once I removed the muffler and shook it, I knew there as a problem. I went through the bottom only as a starting point. It looks like it is the only access I need.
|
09-09-2015, 09:55 AM | #6 |
Not Yet Wild
Join Date: Jul 2013
Posts: 26
|
Re: Anyone ever cut open to repair a g16 muffler?
Muffler is installed and quiet.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
68....Open canvas! | Gas Harley Davidson | |||
Wide open | Electric EZGO | |||
wide open | Electric Club Car | |||
1989 ezgo muffler repair | Gas EZGO | |||
Cutting G9 muffler open and gutting | Gas Yamaha |