G1 carb connections?

stacker9000 · 01-10-2018, 08:33 PM

So, I am working on a G1 for a friend, previous owner did the oil injection bypass, & I have pulled carb to clean & replace hoses.
My question is, can anyone tell me what the carb connections are designated for, primarily the 90 degree elbow connection on the opposite side of the fuel & injection connections(I think).
Initial problem was, it would start & idle well, but would bog or "load up" upon accelerating, is there anything else I should be looking for?
Thanks!

Lochlin · 01-11-2018, 12:23 PM

The one with the 90 degree bend is the one for the gas. The one on pretty much exact opposite side of the carb from the gas connection is merely an overflow and can be ignored. The remaining nipple would have been for incoming oil so that should be plugged.

stacker9000 · 01-11-2018, 06:05 PM

Thank you sir, I have the fuel feed line connected to the "overflow" apparently! hopefully this will solve my issues. Again,
Thank you!

Spicyunicorn · 01-11-2018, 10:12 PM

As lochlin said it's important to plug the oil injection hole on the carb if not it will create a lean condition

01-10-2018, 08:33 PM	#1
stacker9000 Not Yet Wild Join Date: Mar 2016 Posts: 4	G1 carb connections? So, I am working on a G1 for a friend, previous owner did the oil injection bypass, & I have pulled carb to clean & replace hoses. My question is, can anyone tell me what the carb connections are designated for, primarily the 90 degree elbow connection on the opposite side of the fuel & injection connections(I think). Initial problem was, it would start & idle well, but would bog or "load up" upon accelerating, is there anything else I should be looking for? Thanks!
stacker9000 Not Yet Wild Join Date: Mar 2016 Posts: 4

01-11-2018, 12:23 PM	#2
Lochlin Gone Wild Join Date: May 2011 Location: Pittsburgh Posts: 2,950	Re: G1 carb connections? The one with the 90 degree bend is the one for the gas. The one on pretty much exact opposite side of the carb from the gas connection is merely an overflow and can be ignored. The remaining nipple would have been for incoming oil so that should be plugged.

01-11-2018, 06:05 PM	#3
stacker9000 Not Yet Wild Join Date: Mar 2016 Posts: 4	Re: G1 carb connections? Thank you sir, I have the fuel feed line connected to the "overflow" apparently! hopefully this will solve my issues. Again, Thank you!
stacker9000 Not Yet Wild Join Date: Mar 2016 Posts: 4

01-11-2018, 10:12 PM	#4
Spicyunicorn Gone Wild Join Date: Jun 2015 Location: NW Iowa Posts: 1,669	Re: G1 carb connections? As lochlin said it's important to plug the oil injection hole on the carb if not it will create a lean condition

Similar Threads
Thread	Forum
Connections	Electric Club Car
G14 electric connections	Electric Yamaha
Check those connections	Electric EZGO
Battery connections.	Electric EZGO
connections	Electric Club Car

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum