|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
03-02-2019, 09:28 PM | #11 |
Not Yet Wild
Join Date: Feb 2019
Posts: 4
|
Re: 96 EZGO DCS Alltrax no forward
Disconnecting reverse micro switch just shuts down everything regardless of f1 or f2 swap.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-03-2019, 12:59 PM | #12 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: 96 EZGO DCS Alltrax no forward
If a DCS cart (including those with a DCX or NCX installed) runs when the direction selector is in Reverse, both F/R switches are good, the solenoid is good, the batteries are good, the cables are good, etc., etc. and etc. Maybe not all that good, but at least good enough to move the cart.
The DCS controller and its aftermarket clones, default to Forward and has to be told to do Reverse (B+ on Pin-4). To get the controller to power up, B+ is needed on Pins 6, 9 & 10, and then applying B+ to Pin-5 causes the solenoid to activate. Pins 9 & 10 have B+ on them whenever the Run/Tow switch is in Run. Pin-6 has B+ on it when a direction is selected on F/R AND Keyswitch is on. Pin-5 has B+ on it when pedal is pushed. The symptoms you've posted indicate the controller is bad. |
|
|
Similar Threads | ||||
Thread | Forum | |||
New Alltrax XCT Forward/Reverse backwards | Electric Club Car | |||
My ezgo is going forward in forward and reverse | Electric EZGO | |||
EZGO 48v Alltrax - No Go | Electric EZGO | |||
99 txt with alltrax 300 amp hesitates in forward | Electric EZGO | |||
2006 ezgo forward is reverse and reverse is forward please help | Electric EZGO |