RXV Seat Lock

[808EZGO]

Just finished installing my lock for my 2016 RXV and thought I'd share this.
I use a 12 volt linear actuator and a 6 pin rocker switch to control it in/out.
This is power by my 48 volt to 12 volt voltage reducer that's connected to my key switch. So it will only work when key is on.

I mounted it under the seat with the attached bracket on one end and a 1" PVC pipe bracket in front. I positioned the actuator so it extend under the framing and not just the plastic.

Let me know what you guys think....

[bronsonj]

That looks pretty beefy to me! The only obvious issue is if your pack dies you'll have a devil of a time getting power to the actuator, but in reality I think that's a pretty darned good solution.