|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
11-07-2019, 05:26 PM | #1 |
Not Yet Wild
Join Date: Oct 2018
Posts: 5
|
ezgo pedal box micro switch
I have a 1999 ezgo converted to 48v with and an axe 4855 controller a mzj400amp and sw202 f&r switching. we keep burning the pedal box micro switch with in seconds of testing the forward/ reverse operation of cart. any suggestions?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-07-2019, 06:09 PM | #2 |
Gone Wild
Join Date: Nov 2011
Location: S.E. Mi.
Posts: 531
|
Re: ezgo pedal box micro switch
Could be you have the diode installed backwards on the solenoid. The end of the diode with the stripe goes on the small terminal with the positive wire.
|
11-08-2019, 07:46 AM | #3 |
Not Yet Wild
Join Date: Oct 2018
Posts: 5
|
Re: ezgo pedal box micro switch
I put new diode and solenoid with stripe band on the + side of small terminals so it is ok. Wasn't sure if the diodes on the sw202 can cause this or a bad controller ? any thoughts
|
|
|
Similar Threads | ||||
Thread | Forum | |||
TXT PDS Pedal Box Micro Switch | Electric EZGO | |||
TXT PDS foot pedal micro switch! | Electric EZGO | |||
1997 Ezgo Txt pedal box micro switch | Electric EZGO | |||
88 marathon gas pedal Micro Switch | Gas EZGO | |||
2000 EzGo foot Pedal Micro Switch | Electric EZGO |