|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
01-12-2020, 06:36 PM | #1 |
Gone Wild
Join Date: Feb 2017
Location: Liberty Hill, Texas
Posts: 472
|
Anybody used this lift kit ??
Seeking a little input,,,
This lift kit (site sponsor E Cart Parts) https://www.ecartparts.com/allsports...it-made-in-usa I have used other AllSports lifts and found them very good quality, just not this particular one.... The reason I'm leaning to this one is the fact that it comes with new spindles etc, and mine and the kingpins are pretty sloppy... Any input either way is welcome and appreciated ! Thanks ! Stan |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-13-2020, 07:59 AM | #2 |
Gone Wild
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,176
|
Re: Anybody used this lift kit ??
Only thing I see I don’t like is it looks like the tie rod that goes between spindles is under the axle and low. I can see that getting bent quickly.
|
01-14-2020, 11:19 AM | #3 |
Not Yet Wild
Join Date: Apr 2019
Location: Statesboro, Ga
Posts: 49
|
Re: Anybody used this lift kit ??
Just installed this lift, I like that it came with new spindles. On the rear the it uses longer leaf spring plates. So far I like it. Will measure the height of the tie rod whine I get home .
|
01-14-2020, 05:23 PM | #4 |
Gone Wild
Join Date: Feb 2017
Location: Liberty Hill, Texas
Posts: 472
|
Re: Anybody used this lift kit ??
Thanks to you both for the input !!
Im gonna try it !!!! Can always count on the folks here for guidance !! |
01-14-2020, 07:43 PM | #5 |
Gone Wild
Join Date: Sep 2017
Location: Slippery Rock
Posts: 243
|
Re: Anybody used this lift kit ??
They install on the top so they are tucked behind the axle. I just installed same lift and I did have to lengthen them.
|
01-15-2020, 04:28 PM | #6 |
Not Yet Wild
Join Date: Apr 2019
Location: Statesboro, Ga
Posts: 49
|
Re: Anybody used this lift kit ??
Measured the tie rod height and it is 12 inches above ground and sits a few inches below the drop axel
|
01-16-2020, 10:51 AM | #7 |
Not Yet Wild
Join Date: Apr 2019
Location: Statesboro, Ga
Posts: 49
|
Re: Anybody used this lift kit ??
Picture of the tie rod
|
01-16-2020, 10:54 AM | #8 |
Gone Wild
Join Date: Feb 2017
Location: Liberty Hill, Texas
Posts: 472
|
Re: Anybody used this lift kit ??
Thanks guys !!!!
I appreciate your input and efforts !!! |
|
|
Similar Threads | ||||
Thread | Forum | |||
RHOX LIFT-100 6" Lift Drop Spindle Steering Stabilizer? | Lifted Golf Carts | |||
Marathon Lift questions....Econ lift vs Jake 4" | Lifted Golf Carts | |||
Spindle lift with Z lift - How to lift rear?? | Lifted Golf Carts | |||
Axle lift vs. Spindle lift- Pros and Cons | Lifted Golf Carts | |||
Axle lift vs. Spindle lift- Pros and Cons | Electric EZGO |