04-15-2022, 02:25 PM | #1 |
Not Yet Wild
Join Date: Apr 2011
Posts: 34
|
Precedent front end
Got a 2008 gas Precedent. The front end bushings are shot.
The leaf spring came apart easy. The a arm bolt came out and the bushing is not there but the sleeve will not come out. What do I do? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-15-2022, 05:56 PM | #2 |
Bonafide Nincompoop
Join Date: Dec 2015
Location: Charlottesburg Va
Posts: 8,987
|
Re: Precedent front end
For the outer you also need to remove the lower shock bolt.
For the inner both bolts need to be loosened. Do one arm at a time, when you put the bolt back in thread it in by hand 2-3 turns then do the other side. Make sure both sides are done and the arms are both back in place with bolts in before tightening anything. |
|
|
Similar Threads | ||||
Thread | Forum | |||
Precedent front shocks - are they bad? | Electric Club Car | |||
04 Precedent Front End | Electric Club Car | |||
13 precedent front tow bar??? | Gas Club Car | |||
Precedent Front lights / front blinkers not working .... Where do I start looking? | Electric Club Car | |||
Precedent Front End Assembly | Electric Club Car |