|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
05-24-2012, 07:26 AM
|
#1 |
|
Not Yet Wild
Join Date: Apr 2012
Posts: 1
|
E-Z-GO TXT Cage Frame
Looking for an expert machining shop or recommendations in Southwest Michigan that can make a custom metal frame to hold a roof rack canopy that weighs about 65 pounds. The thickness of the metal is important, but it seems to me the location of the tie ins to the frame are more important. So if anyone has any ideas or suggestions as to where to connect that would be helpful. This is a standard 2006 TXT apparently. I've seen a lot of quality roll cage frames on this site and am wondering if there are any pictures of where the connection points are in the back end.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
05-24-2012, 03:18 PM
|
#2 |
|
Not Yet Wild
Join Date: Oct 2011
Posts: 54
|
Re: E-Z-GO TXT Cage Frame
Have you tried calling one of the site sponsors?
http://www.outbackfabricators.com/ *Edited with the right link...sorry. |
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| New Cage | Design Center | |||
| Roll Cage? | Electric EZGO | |||
| Roll cage top | Design Center | |||
| cage | Lifted Golf Carts | |||
| my cage will soon be done | Design Center | |||
Linear Mode
