|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
10-28-2012, 08:17 PM | #1 |
Getting Wild
Join Date: Aug 2012
Posts: 81
|
Question about stretching an EZ-GO PDS
I have stripped an 08 EZ-GO PDS with plans to cut the frame and stretch it about 30". I have read several of the threads here about how to address the brake cables and understand, but I am curious about the wiring. I hate to cut and splice the wires which i am afraid will invite corrosion. Do most folks run all new wire or is there a harness that can be purchased for a stretch job on a PDS?
Thanks, PBB |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Stretching a Club Car | Design Center | |||
stretching a 95 ezgo | Design Center | |||
stretching the front on a G16 for more tire to rocker clearance | Lifted Golf Carts | |||
Stretching? | Design Center |