|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
04-10-2014, 08:17 PM | #1 |
Not Yet Wild
Join Date: Aug 2013
Posts: 1
|
Brake switch confusion
Many thanks in advance for help!
I have a 2013 EZGO TXT factory front light bar, tail light, with a VSM 900 turn signal switch installed. Trying to figure out how to hook up the brake switch. It's standard mount to the pedal pressure switch. Two wires coming out to break the connection. Rear tail light has a 1157 bulb with a red, black, white wire. All works well. There's four wires coming off the factory harness. Three wire coming out of the tail light. HOW THE HELL DOES THAT WORK! The wiring diagram I have shows the brown wire for the brake switch. plug in the brake switch you lose the turn signals. WTH am I missing! Thank you again. Oh and yes I've read all the threads about the old model brake switch mod. Not getting me anywhere. I apologize for coming across frustrated, but I am. ..Just tired of messing with POS. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Is this a brake light switch? | Electric Club Car | |||
brake light switch | Electric Club Car | |||
Brake Switch | Gas EZGO | |||
brake switch | Electric EZGO | |||
Brake switch | Electric EZGO |