Precedent amplifier location

Hyper · 07-24-2014, 06:11 AM

Quote:

Originally Posted by mrtrout

What type of sound bar did you use?

I used a Wetsounds stealth 10. I have done a few of these bars. They just came out and boy do they sound good.Not bad for a bar that hold 10 tiny speakers. I wanted something out of the way that would give me some sound without compromising space. It has a built in 300 watt class D amplifier that is extremely efficient and works with any Bluetooth device. Not cheap, but it does the job. Installation was not bad. Most important, is that I mounted to where you can't even tell that I have a sound bar.

mrtrout · 07-24-2014, 07:27 AM

Nice! I saw those on line the other day. Post a pic of your installation when you get a chance.

Hyper · 07-24-2014, 11:34 PM

Quote:

Originally Posted by mrtrout

Nice! I saw those on line the other day. Post a pic of your installation when you get a chance.

I sure will. I was able to mount with no problem. Running the wire was a different story. The only drawback in my opinion with this sound bar. It's pretty thick wire with big connectors, where you connect to bar and where you connect your voltage. Looks good in my opinion.

Hyper · 07-25-2014, 09:20 AM

Quote:

Originally Posted by mrtrout

Nice! I saw those on line the other day. Post a pic of your installation when you get a chance.

I am new to forum world and I thought I had posted pics but it did not upload. Can I upload pics from my phone? Please let me know. Thanks

mrtrout · 07-25-2014, 02:07 PM

I imagine they will have to be hosted somewhere like Photobucket.

Hyper · 07-25-2014, 05:19 PM

wtsounds bar.jpg

Hyper · 07-25-2014, 05:33 PM

wetsounds bar2.jpg
I think I finally figured it out. I apologize for posting twice 2 different pictures. I custom fit the brackets for sound bar between factory canopy brackets. I drilled a hole and ran my wire thru the inside of the roof bracket. Keep in mind that wire is pretty thick and it has inputs, outputs, power ground and remote turn-on wires. I cut the thick connectors and re-solder them. I also installed an ARC Audio mini amp to power 2 pair of additional Wetsounds speakers. I am using the stealth bar as my source input and as well as my output to the ARC mini amp. I faced the bar forward instead of facing it towards me, I did this because I had plenty of sound coming out of my other speakers and wanted you to know I was coming. I also hooked up a switch to cut power to the mini amp that power my speakers in the back in the event that I didn't want that much sound. It sounds pretty darn good for a golf cart.

Ap8823 · 07-25-2014, 05:45 PM

Get a dash where they have speaker hole cutouts and hide amp behind

TahoeDawgZ71 · 07-26-2014, 03:30 PM

Quote:

Originally Posted by mrtrout

TahoeDawg - is that a sub box mounted above the rear axle?

Indeed it is.

mrtrout · 07-26-2014, 06:54 PM

Nice setup Hyper! Thanks for posting the pics. I may have to steal your idea Tahoe.

07-24-2014, 07:27 AM	#12
mrtrout Not Yet Wild Join Date: Nov 2010 Posts: 23	Re: Precedent amplifier location Nice! I saw those on line the other day. Post a pic of your installation when you get a chance.
mrtrout Not Yet Wild Join Date: Nov 2010 Posts: 23

07-25-2014, 02:07 PM	#15
mrtrout Not Yet Wild Join Date: Nov 2010 Posts: 23	Re: Precedent amplifier location I imagine they will have to be hosted somewhere like Photobucket.
mrtrout Not Yet Wild Join Date: Nov 2010 Posts: 23

07-25-2014, 05:19 PM	#16
Hyper Not Yet Wild Join Date: Jul 2014 Location: Houston Posts: 48	Re: Precedent amplifier location wtsounds bar.jpg

07-25-2014, 05:33 PM	#17
Hyper Not Yet Wild Join Date: Jul 2014 Location: Houston Posts: 48	Re: Precedent amplifier location wetsounds bar2.jpg I think I finally figured it out. I apologize for posting twice 2 different pictures. I custom fit the brackets for sound bar between factory canopy brackets. I drilled a hole and ran my wire thru the inside of the roof bracket. Keep in mind that wire is pretty thick and it has inputs, outputs, power ground and remote turn-on wires. I cut the thick connectors and re-solder them. I also installed an ARC Audio mini amp to power 2 pair of additional Wetsounds speakers. I am using the stealth bar as my source input and as well as my output to the ARC mini amp. I faced the bar forward instead of facing it towards me, I did this because I had plenty of sound coming out of my other speakers and wanted you to know I was coming. I also hooked up a switch to cut power to the mini amp that power my speakers in the back in the event that I didn't want that much sound. It sounds pretty darn good for a golf cart.

07-25-2014, 05:45 PM	#18
Ap8823 Getting Wild Join Date: Sep 2013 Location: Las Vegas Posts: 85	Re: Precedent amplifier location Get a dash where they have speaker hole cutouts and hide amp behind

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

07-26-2014, 06:54 PM	#20
mrtrout Not Yet Wild Join Date: Nov 2010 Posts: 23	Re: Precedent amplifier location Nice setup Hyper! Thanks for posting the pics. I may have to steal your idea Tahoe.
mrtrout Not Yet Wild Join Date: Nov 2010 Posts: 23

Similar Threads
Thread	Forum
2006 Precedent - Horn Location	Electric Club Car
08 Precedent Voltage reducer location?	Electric Club Car
FUSE Location club car precedent 2004	Electric Club Car
Precedent Fuse location?	Electric Club Car
Amplifier	Gas EZGO