|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
10-26-2020, 07:40 AM | #1 |
Gone Wild
Join Date: Feb 2020
Location: Naples FL
Posts: 466
|
I need to replace my keyed on switch is there a better one to use with a volt meter
It become very difficult to turn and you can't just put the key in and go you have to play with it for a bit so is there a double pole switch that can be used for the power on the meter?
to clarify is there a 3 or 4 pole keyed switch that takes the place of the stock single pole keyed switch ? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-26-2020, 12:41 PM | #2 |
Gone Wild
Join Date: Feb 2020
Location: Naples FL
Posts: 466
|
Re: I need to replace my keyed on switch is there a better one to use with a volt met
here is an Amazon aftermarket switch that has 2 poles (4 contact points)
https://www.amazon.com/dp/B07ZKKZ2YK...03_03_t_img_lh and here is the stock replacement https://www.amazon.com/gp/product/B0...=ATVPDKIKX0DER usaully a two pole switch will have 2 separate contact closures, one makes the circuit to enable the car and one can make a contact closure to say be used on a 12 volt circuit, like triggering a relay closure to power the 12 volt voltage reducer |
10-26-2020, 01:09 PM | #3 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: I need to replace my keyed on switch is there a better one to use with a volt met
The Ezgo switch has 1 36v and 1 12v input -
position 1 is off position 2 is 36v on position 3 is 36 and 12 volts on I don't know of another switch that works like this but you could use 2 switches. |
10-26-2020, 01:24 PM | #4 |
Not Yet Wild
Join Date: Aug 2020
Posts: 38
|
Re: I need to replace my keyed on switch is there a better one to use with a volt met
Here is how the stock 3 position switch is wired to the stock state of charge meter.
|
10-26-2020, 01:45 PM | #5 | |
Gone Wild
Join Date: Feb 2020
Location: Naples FL
Posts: 466
|
Re: I need to replace my keyed on switch is there a better one to use with a volt met
Quote:
hmmm my current keyed switch looks just like the second one I posted from Amazon and is just 2 connections a single pole single throw, does anyone have asource for the one shown above? |
|
10-27-2020, 06:30 AM | #6 | |
Gone Wild
Join Date: Mar 2020
Location: CT
Posts: 320
|
Re: I need to replace my keyed on switch is there a better one to use with a volt met
Quote:
https://www.amazon.com/dp/B07ZKKZ2YK...03_03_t_img_lh i use the same one |
|
10-27-2020, 10:11 AM | #7 | |
Gone Wild
Join Date: Feb 2020
Location: Naples FL
Posts: 466
|
Re: I need to replace my keyed on switch is there a better one to use with a volt met
Quote:
|
|
10-27-2020, 01:50 PM | #8 |
Not Yet Wild
Join Date: Aug 2020
Posts: 38
|
Re: I need to replace my keyed on switch is there a better one to use with a volt met
One thing I should point out is that the picture I attached makes it appear that there are 5 'tabs' on the back of the key switch. There are only 4 with both the red and green wires connected to the 'B' tab.
Also, if desired, you can wire the key switch to be more like a car switch where position 1 is off, 2 is accessories, and 3 is run+accessories. |
|
|
Similar Threads | ||||
Thread | Forum | |||
Changing keyed Forward/reverse switch to rocker switch | Electric EZGO | |||
Volt meter to key switch | Electric Yamaha | |||
volt meter and rocker switch | Electric EZGO | |||
VOLT METER INSTALL...can i just replace the battery light indicator? | Electric Club Car | |||
2009 Precedent run/tow toggle switch replaced with keyed switch | Electric Club Car |