lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric golf carts > Melex


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 07-23-2020, 08:19 PM   #1
Elit33
Not Yet Wild
 
Join Date: Jul 2020
Posts: 5
Default Melex 36V upgrade to 48V

Hello,

I am somewhat new to the golf cart community and I appreciate any advice. I see a lot of threads about the Melex but nothing easily accessible about upgrading it to 48V. I have around an 85’ cart 4 wheel. I know I have to replace the motor, controller, and solenoids. Is there anyone who knows which are the best ones to upgrade with or the right sizing for the motor so it’s not hard to mount?

I am completely aware it would make more sense to just buy a 48V but it’s much more fun for me to upgrade this vintage piece. Thank you in advance if you can provide any help!
Elit33 is offline   Reply With Quote
 

Tags
48v, melex, upgrade
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric golf carts > Melex


Thread Tools
Display Modes


Similar Threads
Thread Forum
Help me decide ... Controller upgrade or Motor Upgrade? Electric Club Car
Drive Train Upgrade After Wheel Upgrade? Electric Club Car
Melex / motor upgrade Melex
Motor Upgrade in a Melex 512 Melex
Melex suspension upgrade Electric EZGO


All times are GMT -5. The time now is 08:14 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.